H-7 (200ml)
10084
Regular price $249.99
Tax included.
Shipping calculated at checkout.
Applications
Contents - 200ml, 2x Applicator Pad, 2x Microfiber Towel
Features - 2 Years Durability Hydrophilic Coating
H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.
✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water
✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc
✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt
✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability
✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion
FIELD TEST RESULTS
Drainage Performance Test – Water on hood receding
Less Frequent Visit to Car Wash
3 Months Outside Exposure Test comparison to generic body glass coating
VENDING MACHINE (6 MONTHS AFTER APPLICATION)
MARINE BOAT (12 MONTHS AFTER APPLICATION)
OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)
Direction
1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.
2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.
3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).
4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.
5. After coating, leave to cure in a dry place for 12 hours.
CAUTION!!!
! As it dries, uncoated areas will become obvious. If there are any uncoated areas left behind, reapply to coat to the area.
! Wipe off liquid within 20 min. after applied. If you leave longer, wiping will be hard and may cause an uneven finish. Application should be avoided when the surface to be coated is hot, because the liquid dries immediately and may cause an uneven finish.
! It requires about 1 week for the coating layer to become completely hardened. During the 1 week hardening process, do not rub the coated surface. If you polish coated surface with abrasive, it will cause damage to the coating layer and it will the deteriorate.
! Wrong application of glass coat or incorrect surface preparation to car body CAN damage the paint of your car
!Please be sure you have got all the required expertise and equipment to apply this coating.
! We are not responsible for wrong application of this product or incorrect surface preparation.
H-9 Dual Layer Glass Coat
10117
Regular price $329.99
Tax included.
Shipping calculated at checkout.
Contents - Primer 100ml, Top Coat Liquid 100ml, Sponge with Buff x 2pc, Cloth x 2pc, Gloves x 2pc
Features - 5 Years Durability Coating
H-9 Dual Layer Glass Coat is super water repellent type glass coating which make use of the Japanese state of art technology. Combines 2 different types of glassy layer creating a 9H pencil hardness. Long lasting deep gloss and shine, protects from harmful elements such as dirt, bird droppings, traffic grime, UV light, water, acid rain and light scratches.
✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water
✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc
✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily
✔️ Hardness – 9H Hardness excellent resistance against micro scratches caused by wind dust and dirt
✔️ 5 Years Durability – Durability based on field and accelerated weather testing according to Japanese Industrial Standards(JIS)
✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability
✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface
Dual glass layer creating a super high level of durability and water repellency
| Conventional Coating (Sealant or Wax)
Conventional coating (Sealant or Wax) surface can easily become soften on a hot day allowing dirt to penetrate into the coating. Static electricity also allows oily dirt to adhere. After washing and drying your vehicle it is very common to see dust or dirt residue still reaming on the surface as it has already penetrated into the coating. |
|
H9 Dual Layer Glass Coating (Glass Based Layer) H9 Dual Layer Glass Coating creates a harden coated layer on your vehicles surface similar to glass. The material does not soften when expose to high heat on a hot summer day which prevents dirt from penetrating into the surface. The coating doesn't damage the paint surface and adds a coated protection layer. Allowing ease of maintenance while giving your vehicle a deeper level of gloss and anti-fouling effect for a longer period of time. |
Outside Exposure Test (After 5 Months)
After 5 months SOFT99 H9 Dual Layer Glass Coat still holding up with strong water repellency.
Generic body glass coating and fluorine based coating effect can be seen to have worn off.
H-7 (100ml)
10088
Regular price $159.99
Tax included.
Shipping calculated at checkout.
Applications
Contents - 100ml, 2x Applicator Pad, 2x Microfiber Towel
Features - 2 Years Durability Hydrophilic Coating
H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.
✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water
✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc
✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt
✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability
✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion
FIELD TEST RESULTS
Drainage Performance Test – Water on hood receding
Less Frequent Visit to Car Wash
3 Months Outside Exposure Test comparison to generic body glass coating
VENDING MACHINE (6 MONTHS AFTER APPLICATION)
MARINE BOAT (12 MONTHS AFTER APPLICATION)
OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)
Direction
1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.
2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.
3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).
4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.
5. After coating, leave to cure in a dry place for 12 hours.
CAUTION!!!
! As it dries, uncoated areas will become obvious. If there are any uncoated areas left behind, reapply to coat to the area.
! Wipe off liquid within 20 min. after applied. If you leave longer, wiping will be hard and may cause an uneven finish. Application should be avoided when the surface to be coated is hot, because the liquid dries immediately and may cause an uneven finish.
! It requires about 1 week for the coating layer to become completely hardened. During the 1 week hardening process, do not rub the coated surface. If you polish coated surface with abrasive, it will cause damage to the coating layer and it will the deteriorate.
! Wrong application of glass coat or incorrect surface preparation to car body CAN damage the paint of your car
!Please be sure you have got all the required expertise and equipment to apply this coating.
! We are not responsible for wrong application of this product or incorrect surface preparation.