SMOOTH EGG Clay Bar gently removes iron powders and deposits from glass/ ceramic coatings.
Direction
1. Wash car, removing sand and dust from the body of vehicle.
2. Knead clay bar by hand until it's soft and flat.
3. Gently slide clay bar over wet surface. * Be sure to knead the bar regularly to expose fresh clay.
Note: Always let the clay bar do the work never add pressure on the surface. Always lubricate with water or shampoo water when using clay bar on surface.
Prime Clear Shampoo -Cleansing Shampoo for Coated Cars
A combination of pH-neutral surfactant and mild cleansing powder removes stubborn dirt and water marks from ceramic-coated vehicles, without damaging the coating itself. This product is compatible with all colours.
Direction
1. Rinse off dust and sand with water.
2. Shake well and open the shampoo, apply generously to the included sponge, and wash the vehicle.
3. Rinse thoroughly and remove leftover water droplets with a towel or cloth.
Cleaner design for glass/ceramic coating contains only mild cleaning ingredients. Restoring brightness of coated vehicle body. Symptoms such as water spots, small scratches on door knobs can be easily removed!
Direction
1. Wash off dirt, dust or mud, and wipe off water.
2. Shake bottle well.
3. Pour a coin size amount of liquid onto included towel.
4. Rub towel onto surface one panel at a time on affected areas.
Neutral Shampoo has a superb cleaning properties, which prevents dirt and dry suds sticking to the bodywork, even in summer periods you will only need to rinse it once! Shampoo has anion properties which allows it to create crazy amount of suds giving you an additional layer of safe contact with the bodywork. We strongly recommend using the shampoo with our ‘SMOOTH EGG Creamy Soft Sponge’ to fully unleash the potential of this product.
Direction
1. Wet ‘SMOOTH EGG Creamy Soft Sponge’ first.
2. Pour solution directly onto sponge, or put 5 caps of shampoo into a 20L detailing wash bucket.
3. Lather sponge, if washing with bucket, agitate to allow air to create foams.
4. Glide sponge over body surface in horizontal motion, do not travel backward, compress sponge to release more water and suds.
5. If there is dirt on sponge surface simply squeeze to create suds to lift off dirt.
6. Rinse car after completing process.
7. Wipe off all water drops remaining on surface with a clean or absorption towel. If water drops remain on surface, it may cause spots or stains.
Powerful, pH-neutral, and compound-free, this high-powered shampoo lathers into a thick, creamy foam that just melts the dirt away. Professional size and packaging. Despite its powerful foaming ability, this product has been designed with ease of rinsing in mind. May be used on coated vehicles, diluted 1:50. Compatible with water- and air-driven foamers.
SMOOTH EGG Smooth Cloth is a microfiber towel which is made with the highest level of Japanese technology at every stage of the process, including the making of an original yarn, knitting, cutting, and sewing. It achieves low friction, works smoothly, excellent water absorption, water retention, and evaporation ability.
Direction
1. Wipe down surface, squeeze cloth dry as needed.
* Wash cloth with tap water and dry thoroughly before storing it.
* If cloth gets dirty, wash with a neutral detergent.
Formulated ""Repair Coat"" repairs damaged professional body glass coating, and restores water repellent effect. Just spray on wet body of vehicle after car wash, wipe down surface and you're done! Coating will form a water repellent layer leaving the surface feeling smooth as a peeled boiled egg. Can be used on vehicles without ceramic/ glass coating. Feel free to use on wheels, windows, headlights, tail lamps, plastic parts, vehicle interior, etc. Compatible with any colour vehicle paint.
Direction
1. Remove dust and dirt with water. For best results, use 'SMOOTH EGG Shampoo for Repair'. Do not dry vehicle completely after washing.
2. Spray liquid on wet body of vehicle. * Apply roughly one spray per 30 cm2.
3. Fold included cloth into quarters and wipe down the body of vehicle, wring the cloth to dry as needed.
A pH neutral shampoo best dedicated for maintaining cars with professional coatings, can be used as a standalone maintenance product. Shampoo causes water to glide off when the car is being rinsed, leaving less water drops behind meaning less drying time. The shampoo produces best results if used in conjunction with other products from the SMOOTH EGG series.
Direction
1. Rinse car with water, remove dust and heavy dirt in order to prevent scratching paint.
2. Pour shampoo into bucket or apply squirt directly onto a sponge, create lather, then wash whole vehicle.
3. Rinse vehicle with water and dry using microfiber towel.
Smooth Egg platinum is our top of the range spray sealant. It contains 4 different types of resins, resulting in a wet look, hydrophobic surface and leaving a slick finish on the bodywork. Durability of product will last up to 3 months. Can be applied when vehicle body is still wet after maintenance wash.
Direction
1. Remove any dirt on car bodywork with car shampoo.
2. Rinse off with water.
3. Detach trigger and spray onto wet car body. * 2 Spray will cover an area of 50cm2.
Our newly developed quick coat not only gives your vehicle water-repellent Hydropolymer layer, but prevents water stains with its unique Hydropeeling technology. When a vehicle coated with Smooth Egg Hydro Flash is wet with rain, the residue that would normally result in a stain is carried away along with a small amount of the polymer. This is seriously strong protection. By including a specially formulated levelling agent, we are able to keep our Hydropolymer evenly adhered to your vehicle… and that keeps your car shining beautifully, with a gloss that withstands the elements. This product is suitable for use on wet or dry coated and uncoated vehicles, and may be used on all exterior and interior parts except upholstery. One bottle treats a medium-sized vehicle eight times.
Direction
Note: Before applying Smooth Egg Hydro Flash, be sure to wash your vehicle.
Drying is optional.
1. Shake well, remove the trigger lock, and spray onto the body, 1 spray for every 30cm2 on dry car body, if car body is wet 1 spray for every 15cm2 area
