Professional Detailer

Contents - 2x 50g Clay Bar

Features

SMOOTH EGG Clay Bar gently removes iron powders and deposits from glass/ ceramic coatings.

Direction

1. Wash car, removing sand and dust from the body of vehicle.

2. Knead clay bar by hand until it's soft and flat.

3. Gently slide clay bar over wet surface. * Be sure to knead the bar regularly to expose fresh clay.

Note: Always let the clay bar do the work never add pressure on the surface.
Always lubricate with water or shampoo water when using clay bar on surface.

Contents - 300 ml

Features

Replaces IPA wipe down. Essential for surface preparation prior to applying wax or ceramic and glass coating, it will improve the adhesion of the coating to the vehicles surface. The aerosol design allows minimum product usage while spreading to a large area!

✔ Oil, Polish residue and fillers remover
✔ Prep item before applying wax / coating
✔ Replaces IPA wipe down
✔ Improves the adhesion of the surface protective coating
✔ Safe for paint 

Direction

1. Shake bottle well

2. Spray on desired panel and wipe dry with a dry detailing microfiber cloth

3. Expose new clean areas of the towel to avoid smearing the collected wax, oil or compound back onto the vehicle.

Contents - 180 ml + Microfiber towel

Features

Cleaner design for glass/ceramic coating contains only mild cleaning ingredients. Restoring brightness of coated vehicle body. Symptoms such as water spots, small scratches on door knobs can be easily removed!

Direction

1. Wash off dirt, dust or mud, and wipe off water.

2. Shake bottle well.

3. Pour a coin size amount of  liquid onto included towel.

4. Rub towel onto surface one panel at a time on affected areas.

Contents - 1000 ml

Features

High performance pH neutral shampoo removes stubborn dirt in a flash. Will not attract dirt even if the soap dries up during wash. Powerful wash that regains paint clarity. Ultra-fine cleaner particles clean without damaging the paint. Removes minor water spots in one wash.

Direction

1. Remove sand and dust from car with water.

2. Shake bottle well with cap on.

3. Pour 1 or 2 coin size drops of shampoo directly onto a damp sponge, create lather by rubbing sponge.

4. Clean vehicle with sponge.

5. Rinse well with water until all bubbles are gone.

6. Wipe off all water drops remaining on surface with a clean or absorption towel.
If water drops remain on surface, it may cause spots or stains.

Contents - 1000 ml

Features

Neutral Shampoo has a superb cleaning properties, which prevents dirt and dry suds sticking to the bodywork, even in summer periods you will only need to rinse it once! Shampoo has anion properties which allows it to create crazy amount of suds giving you an additional layer of safe contact with the bodywork. We strongly recommend using the shampoo with our ‘SMOOTH EGG Creamy Soft Sponge’ to fully unleash the potential of this product.

Direction

1. Wet ‘SMOOTH EGG Creamy Soft Sponge’ first.

2. Pour solution directly onto sponge, or put 5 caps of shampoo into a 20L detailing wash bucket.

3. Lather sponge, if washing with bucket, agitate to allow air to create foams.

4. Glide sponge over body surface in horizontal motion, do not travel backward, compress sponge to release more water and suds.

5. If there is dirt on sponge surface simply squeeze to create suds to lift off dirt.

6. Rinse car after completing process.

7. Wipe off all water drops remaining on surface with a clean or absorption towel.
If water drops remain on surface, it may cause spots or stains.

Contents - 1 Sheet (360x360mm)

Features

SMOOTH EGG Smooth Cloth is a microfiber towel which is made with the highest level of Japanese technology at every stage of the process, including the making of an original yarn, knitting, cutting, and sewing. It achieves low friction, works smoothly, excellent water absorption, water retention, and evaporation ability.

Direction

1. Wipe down surface, squeeze cloth dry as needed.

* Wash cloth with tap water and dry thoroughly before storing it.

* If cloth gets dirty, wash with a neutral detergent.

Do not use a bleach and fabric softener.

Contents - 200ml

Features

Formulated ""Repair Coat"" repairs damaged professional body glass coating, and restores water repellent effect. Just spray on wet body of vehicle after car wash, wipe down surface and you're done!  Coating will form a water repellent layer leaving the surface feeling smooth as a peeled boiled egg. Can be used on vehicles without ceramic/ glass coating. Feel free to use on wheels, windows, headlights, tail lamps, plastic parts, vehicle interior, etc. Compatible with any colour vehicle paint.

Direction

1. Remove dust and dirt with water.
For best results, use 'SMOOTH EGG Shampoo for Repair'.
Do not dry vehicle completely after washing.

2. Spray liquid on wet body of vehicle.
* Apply roughly one spray per 30 cm².

3. Fold included cloth into quarters and wipe down the body of vehicle, wring the cloth to dry as needed.

Contents - 500ml

Features

A pH neutral shampoo best dedicated for maintaining cars with professional coatings, can be used as a standalone maintenance product. Shampoo causes water to glide off when the car is being rinsed, leaving less water drops behind meaning less drying time. The shampoo produces best results if used in conjunction with other products from the SMOOTH EGG series.

Direction

1. Rinse car with water, remove dust and heavy dirt in order to prevent scratching paint.

2. Pour shampoo into bucket or apply squirt directly onto a sponge, create lather, then wash whole vehicle.

3. Rinse vehicle with water and dry using microfiber towel.

Contents - 230 ml

Features

Smooth Egg platinum is our top of the range spray sealant. It contains 4 different types of resins, resulting in a wet look, hydrophobic surface and leaving a slick finish on the bodywork. Durability of product will last up to 3 months. Can be applied when vehicle body is still wet after maintenance wash.

Direction

1. Remove any dirt on car bodywork with car shampoo.

2. Rinse off with water.

3. Detach trigger and spray onto wet car body.
* 2 Spray will cover an area of 50cm².

4. Wipe off immediately with included towel.

Contents - 230ml + 1 Wipe Cloth

Features

Our newly developed quick coat not only gives your vehicle water-repellent Hydropolymer layer, but prevents water stains with its unique Hydropeeling technology. When a vehicle coated with Smooth Egg Hydro Flash is wet with rain, the residue that would normally result in a stain is carried away along with a small amount of the polymer. This is seriously strong protection. By including a specially formulated levelling agent, we are able to keep our Hydropolymer evenly adhered to your vehicle… and that keeps your car shining beautifully, with a gloss that withstands the elements. This product is suitable for use on wet or dry coated and uncoated vehicles, and may be used on all exterior and interior parts except upholstery. One bottle treats a medium-sized vehicle eight times.

Direction

Note: Before applying Smooth Egg Hydro Flash, be sure to wash your vehicle.

Drying is optional.

1. Shake well, remove the trigger lock, and spray onto the body, 1 spray for every 30cm² on dry car body, if car body is wet 1 spray for every 15cm² area

2. Wipe off quickly with the included cloth.

Work on a small area at a time.

Contents - 4L

Features

Contents - 4L

Features

Contents - 1800ml

Features

Direction

* Wash the vehicle before application.

1. Spray onto the wet car body.

2. Wipe dry with an absorbent cloth that has been dampened and wrung out.

* If it becomes uneven, wet the body and treat again.

Contents - 400ml

Features

Direction

* Wash the vehicle before application.

1. Spray onto the wet car body.

2. Wipe dry with an absorbent cloth that has been dampened and wrung out.

* If it becomes uneven, wet the body and treat again.

Contents - 360ml

Features

Contents - 80ml, 1x Sponge, 2x Application cloth, 2x Microfiber cloths, 1x Inner cap with a hole

Features

An ultra-hard glass coating with a pencil hardness of 9H is formed on the painted surface at the nano level, providing high levels of water repellency, gloss, stain resistance, scratch resistance, and alkali resistance, providing long-term protection from a variety of pollutants.

Applications

Contents - 200ml, 2x Applicator Pad, 2x Microfiber Towel

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

MARINE BOAT (12 MONTHS AFTER APPLICATION)

OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)

 
Direction

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!

Contents - Primer 100ml, Top Coat Liquid 100ml, Sponge with Buff x 2pc, Cloth x 2pc, Gloves x 2pc

Features - 5 Years Durability Coating

H-9 Dual Layer Glass Coat is super water repellent type glass coating which make use of the Japanese state of art technology. Combines 2 different types of glassy layer creating a 9H pencil hardness. Long lasting deep gloss and shine, protects from harmful elements such as dirt, bird droppings, traffic grime, UV light, water, acid rain and light scratches.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Hardness – 9H Hardness excellent resistance against micro scratches caused by wind dust and dirt

✔️ 5 Years Durability – Durability based on field and accelerated weather testing according to Japanese Industrial Standards(JIS)

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

Outside Exposure Test (After 5 Months)

After 5 months SOFT99 H9 Dual Layer Glass Coat still holding up with strong water repellency.
Generic body glass coating and fluorine based coating effect can be seen to have worn off.

Features

Cutting • Polishing • Finishing

Abrasives for correcting and finishing automobile paint

Formulated for efficient correction (scratch removal), polishing, and high-gloss finishing of automobile paint. Suitable for machine polish only

Cutting Compound 300ml
Remove scratches, orange peel, and sandpaper marks with Cutting Compound
Wool buff pad @ 1800rpm

Polishing Compound 300ml
Remove marks from Cutting and bring to a gloss with Polishing CompoundSponge/Euro foam buff pad @ 1500rpm
(if sandpaper marks remain, use wool)

Finishing Compound 300ml
If desired, bring paintwork up to perfection with clear gloss then finish with Finishing Compound
Sponge/Euro 'finishing' foam buff pad @ 1300rpm

Excellent properties with results:

• Suitable for all types of automobile paint
• Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring
• New anti-clogging, low dust formula improves working conditions
• Can be used as a two- or three-step process, as needed
• Contain no silicone, gloss-enhancers, or any other unnecessary additives

Contents - 300ml

Features

Remove scratches, orange peel, and sandpaper marks with Cutting Compound

• Suitable for all types of automobile paint
• Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring
• New anti-clogging, low dust formula improves working conditions
• Can be used as a two- or three-step process, as needed
• Contain no silicone, gloss-enhancers, or any other unnecessary additives

Recommended Pad & Speed

Wool buff pad @ 1800rpm

Contents - 300ml

Features

If desired, bring paintwork up to perfection with clear gloss then finish with Finishing Compound

✔ Suitable for all types of automobile paint
✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives

Recommended Pad & Speed

Sponge/Euro 'finishing' foam buff pad @ 1300rpm

Contents - 1000ml

Features

For cut use a wool pad and foam pad to finish.

Contents - 5000ml

Features

Powerful, pH-neutral, and compound-free, this high-powered shampoo lathers into a thick, creamy foam that just melts the dirt away. Professional size and packaging. Despite its powerful foaming ability, this product has been designed with ease of rinsing in mind. May be used on coated vehicles, diluted 1:50. Compatible with water- and air-driven foamers. 

Applications

Contents - 100ml, 2x Applicator Pad, 2x Microfiber Towel

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

MARINE BOAT (12 MONTHS AFTER APPLICATION)

OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)

 
Direction

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!

Contents - 4000ml

Features

pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.

Direction

1. Wash off sand, mud or dust prior to spraying.

2. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.

3. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.

* When spray over brake disc, it reacts and changes colour.

Rinse away immediately, if left on too long, may cause bad effects for brake disc.

4. Wipe off with clean towel.

Carry out brake test with low gear 2-3 times after cleaning.

* This product is formulated for wheel.

If use for car body, carefully rinse off with water afterwards.

Contents - 4000 ml

Features

Multi-purpose interior cleaner. Can be used on all surface (fabric, trims, dash, and windows. Super quick drying, leaves no additional finish. Eliminates odour and leaves a refreshing grape fruit scent. Contains ethanol for antibacterial clean.

Directions

When cleaning inside window, seat and floor mat:

1. Directly spray onto area and wipe off with dry clean towel.
* Allow liquid to soak, then wipe off
* Wipe off with water if use for cleaning child seat.

When cleaning dash board, handles, trims, plastic and LCD screen

1. Spray liquid directly onto clean dry towel and wipe desired area.