Exterior

Contents - 100ml

Features

Combining the abrasive powder of small, hard particles and big, soft particles, Glaco Glass Compound Roll-On is able to remove the toughest stains made from oily dirt and fluorine film. By just applying the product lightly onto the glass you will see immediate results as the roll-on removes the oil-film with ease. This convenient product can be used as surface preparation just before applying any coating to the glass.

Direction

1. Remove dust and dirt from glass with water, wipe off any water drops remaining on surface.

2. Shake bottle well with cap on and remove plastic seal.

3. Squeeze handle part of bottle to release compound liquid.

4.Polish onto glass until surface stops repelling liquid.

5. Wait for compound to dry, then wash glass clean with water to make a slurry and wipe off.

6. Remove polishing pad from applicator, then wash and dry for future use.

Contents - 70ml

Features

Maintains a strong coating which resists friction from wipers, dust, car-wash or cleansers, and lasts 6 times longer than conventional coating agents. The water repellency lasts up about 1 year.

Direction

1. Remove dust and dirt from windscreen with water.

2. Use ‘Glaco Roll On Compound’ in advance for surface preparation.

3. Take cap off and apply on dry windscreen.

4. Press side of bottle to allow fluid out and rub firmly onto windscreen without splashing fluid.
* Do not apply on wet windscreen as it may cause uneven marks to surface.

5. After drying for 5-10 minutes, wipe off with a dry clean towel.

6. Allow drying for at least 12 hours for coating to bond firmly onto windscreen.

Contents - 200g

Features

Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

✔️ Coats up to 40 vehicles!

Direction

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.

3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.

Contents - 40 ml

Features

Repellent prevents water from remaining on the surface by lining the mirror with super-fine, microscopic studs. Spray creates an even coating and shortens the process. Suitable for reverse surfaces such as mirrors and reverse cameras.

Direction

* Clean side mirror/ reverse camera with car shampoo or 'Glaco Compound Roll On'

1. Spray evenly onto surface from a distance of approximately 15cm.
Tip: We recommend using the packaging or putting a towel around the mirror while spraying, in order to prevent fluid getting on other parts.

2. Allow to dry completely (in the summer for 1 hour, in the winter for 2 hours)

*Do not touch surface when dry.

Contents - 110ml

Features

Using the newly developed S.A.R.F. (Strong Adhesion + Rapid Finish) technology, the latest generation of Glaco creates an ultra-smooth layer that pushes away rain more powerfully than ever before... and it lasts for 4 months!
The swivel-head and large, square application felt allow for much easier application and make sure the corners get a proper coat.
Also repels traffic film, snow, and frost!

Direction

*Note: Wash away dirt and dust, and dry completely before application. Unscrew the cap and remove.

1. Press onto the glass and gently squeeze to release the liquid, allowing it to soak into the felt head.

2. Apply to the glass in a criss-cross pattern, squeezing to release more liquid as necessary. Leave no gaps.

3. Dry for 5-10 minutes, and wipe up with a tightly-wrung out damp towel.

Incomplete removal may lead to wiper judder.

Contents - Abrasive 80ml, Ultrafine pad L ×1, Ultrafine pad S ×1, Compound Sponge ×1

Features

The high-gloss black plastic known as piano black shows scratches very easily, and can show age much more quickly than paint or other areas of the vehicle. This kit makes it easy to restore painted and unpainted piano black and other high-gloss plastics by hand, refining them to a near new condition.

Direction

Note: Be sure to thoroughly clean and thoroughly dry the area to be treated, and mask off neighbouring areas. Use a scratch removal compound (sold separately) with the compound sponge to remove any deep scratches beforehand.

1. With the cap closed, shake the bottle well.

2. Choose an ultrafine pad size appropriate or comfortable. Apply a moderate amount of compound to the black surface of the pad. Polish the surface while spreading the liquid in horizontal and vertical motions. Aim work on one 30×30 cm area at a time.

3. After polishing, remove any masking and wipe up any residue with a soft, clean towel.

Contents - 200g

Features

Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

✔️ Coats up to 40 vehicles!

Direction

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.

3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.

Contents - 80ml Bottle, 1 x Pad

Features

Newly formulated triple-abrasive particles easily removes scaly spots which conventional compound cleaners cannot. Removes fluorine and sticky oil-film deposits. Restores car's glass close to original transparency. Special application pad is included.

Direction

1. Remove dust and dirt from glass with water, dry off any water remaining on surface.

2. Shake bottle well.

3. Pour liquid onto white side of included pad, begin to polish surface of glass.

4. Finally, wash glass cleanly with water.

Contents - 500ml

Features

Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a highly durable Fusso coating, cleaning and coating in one step! The wax coating is reinforced with fluoro polymers to enhance and extend hydrophobicity for up to 180 days. Perfect for maintaining Fusso Coat. Contents will treat 5 mid-size vehicles.

Direction

* Before applying dirty vehicle, be sure to wash dirt off and dry to avoid scratches.

In cases of staining, use specialised cleaners 'Silicone Off'.

1. Shake well and switch nozzle to ON.

2. Spray surface of vehicle, 1 spray for every 30cm² area.

3. Without allowing to dry, lightly wipe across the surface with a clean, dry towel.

Refold the towel to expose a fresh surface when wiping becomes difficult.

Content - 500ml

Features

pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.

Direction

1. Wash off sand, mud or dust prior to spraying.

2. Shake bottle well approx. 20 times, and turn trigger "ON".

3. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.

4. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.

* When spray over brake disc, it reacts and changes colour.

Rinse away immediately, if left on too long, may cause bad effects for brake disc.

5. Wipe off with clean towel.

Carry out brake test with low gear 2-3 times after cleaning.

* This product is formulated for wheel.

If use for car body, carefully rinse off with water afterwards.

Contents - 120ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.

Direction

*Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.

Features

The Kiwami, which translates to Extreme Gloss, is a great product for those who desire perfect balance between glossy finish and protection. Extreme Gloss is very easy producing a strong beading effect. Making your car paint shiny and smooth as silk! Available in two tone variations to produce best results depending on your vehicle’s paint colour.

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.

3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

* Drying time may be longer in cold temperature.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.

Contents - 70ml

Features

Formulated to coat polycarbonate plastic and glass, such as headlight covers, side visors, tail lamp covers, helmet shields and goggles. Specially designed curved applicator and included microfiber cloth for ease of application. Repels water under air pressure when driving. If you are a motorcycle or race car enthusiast, this product sure is suited for your needs!

Direction

1. Prepare the surfaces by washing and decontaminating.

2. Take off the cap and apply directly with felt applicator.

3. Apply gently ensuring full coverage.

4. Immediately wipe off with included towel.

*No need to wait for drying. Wipe off immediately before liquid gets dry.

Contents - 200g

Features

By just applying the wax with included microfiber cloth, Mirror Shine WAX will create a mirror-like clear gloss and shine. This solid wax creates a thick-film coating without the need to wipe or dry, and it lasts for up to 3 months. May be used on plastic parts as well, such as headlight covers, car visor and tail lamps.

Direction

*Make sure car colour is compatible with this product.
* Wash and decontaminate car surface.

1. Take wax using included cloth and apply evenly to car surface.

2. All you need to do is polish firmly on the surface, there is no need to wipe off.

*Make sure to finish the entire process. If left unfinished, it may cause spots or unevenness.
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.

Contents - 1x Coating Agent bottle (15mL), 2x Hard Sponge, 2x Soft Sponge, 3x Silicone off Wipes Sheets, 2x Gloves

Features

Bring the life back to faded plastic and rubber trim! This treatment restores the deep darkness, natural gloss, and rich texture of black trim to revitalize your vehicle. The unique coating liquid penetrates into the surface and polymerizes to form a flexible yet glossy surface, making it suitable for restoring both hard plastic and soft rubber!

Direction

Note: Apply only to clean, dry, unpainted plastic and rubber.

1. First clean and degrease the area to be treated using the included ‘Silicone Off’ degreasing sheets.

Note: Some textured plastics may pick up fibers from the sheet. Remove these before proceeding. To prevent the sheets from drying out, firmly seal the package between uses.

2. Cut sponge to suitable size for area to be treated. The black sponge is for hard plastic, the white sponge is for soft rubber. Apply a small amount of the liquid (green label), and spread thinly and evenly across the surface to be treated.

Note: Some rubber parts may absorb the liquid. Keep applying until enough liquid remains.

3. After drying for around 5 minutes, use a fresh sheet to lightly wipe up the surface for an even finish. If left for too long, the excess will not be possible to remove.

Note: Do not touch or wet for 24 hours. Do not reuse sponges that have hardened. If the liquid unintentionally comes into contact with another surface, wipe off immediately.

Content - 170g

Features

Solid wax creates a hard coating durable up to 1 month. Enhances tire natural gloss black. Can be used to on tires, convertible leather top, fix scuff marks on exterior bumper and trims.

Direction

1. Remove dirt from tires, convertible leather top or bumper in advance.

2. Take cap off and take out included applicator sponge.

3. Put wax on desired area and apply it thinly.

4. Allow to dry for approximately (5-10 minutes), polish with a soft cloth to get ultimate, beautiful matte finish.

Contents - 70 ml

Features

Quick and easy glossy tire shine! Applicator can adjust for tire shape and easy to apply. Can apply up to 3-4 vehicles. High gloss finish with durability up to 6 weeks!

Direction

1. Wash off sand or dust in advance and ensure tire is dry.

2. Shake bottle well.

3. Remove cap and squeeze bottle allowing liquid to soak sponge.

4. Attach sponge side to tire sidewall and spread evenly around tire.

5. Allow to dry for approximately 5-10 minutes.
No need to wipe off.

Contents - 1x 50ml Base Cleaner, 1x 8ml Coating Liquid, 2x Sponge, 1x Cloth

Features

Restore headlights, blinkers and taillights. Light one is a multi-step restoration kit that gives your headlight lenses a deep clean and removes haze and discoloration. 

Direction

1. Remove dust and dirt prior to cleaning and application.

2. Shake "Base Cleaner" bottle well, pour liquid onto included cloth and polish lense.

3. Wipe off with clean side of cloth.

4. Shake "Hard Top Coat" bottle well, pour liquid onto included sponge and spread evenly allowing to dry for 1 minute.

* The coating film takes 3-4 days to harden completely. Do not touch or wet the car for 24 hours after applying.

Contents - 40ml Base Cleaner, 8ml Coating Liquid, 4 x Special Sheets, 4 x Sponge

Features

Restoration for unpainted resin parts such as a bumper or around wipers. Included 'Liquid Binder' removes dirt marks from the surface of resin parts, and 'Hard Clear Coat', creating a Silicon-based thick hard film coating.

Direction

1. Remove dirt, oil and any other unwanted residues from surface.

Dry completely.

2. Apply a small amount of “Liquid Binder” onto included sheet, then spread thinly and evenly.

3. Wipe off with clean side of sheet.

4. Detach one sponge, apply “Hard Clear Coat” onto black side of included sponge and spread evenly.

5. Do not touch or wet surface for 24 hours.

Contents - 300ml

Features

Rain Drop coating is formulated to apply onto the entire surface of car body, glass, plastic and chrome. The bazooka trigger spray design allows super-fast product application. Coating protects paint up to 3 months and glass 2 months.

Direction

1. Before use, shake can up and down about 20 times.

2. Wash vehicle to remove any dirt and dust.
No need to completely dry vehicle, can apply product on wet surface.

3. Spray onto wet body/ glass, 1 second will cover about 1m² area.

4. After spraying, immediately spread and wipe foam around surface with a microfiber or cotton towel. Wring out towel regularly.

5. Leave to dry completely for about 5 minutes in hot conditions and 20-30 minutes in winter

!warning: do not turn the tab

if tab is turned it will release the propellant making product redundant.

tab is designed for safe disposal of spray can.

only turn tab in the upward direction when product is completely used or emptied.

this will allow for the release of propellant from the can to be safely disposed of.

Contents - 500ml

Features

Gel type spray glass cleaner lets you clean the glass easily without any liquid or water droplets leaving residue. The cleaning components are held in the gel, giving time to penetrate dirt and increase the effectiveness of cleaning stubborn dirt, such as bird droppings. Also suitable for use on mirrors, unpainted plastic, and rubber parts.

Direction

1. Turn the spray nozzle to “ON”.

2. Without shaking, spray onto the glass surface from 15 – 20cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary.

*If some residue remains on the glass, wipe again with a clean towel.

Contents - 4000ml

Features

pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.

Direction

1. Wash off sand, mud or dust prior to spraying.

2. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.

3. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.

* When spray over brake disc, it reacts and changes colour.

Rinse away immediately, if left on too long, may cause bad effects for brake disc.

4. Wipe off with clean towel.

Carry out brake test with low gear 2-3 times after cleaning.

* This product is formulated for wheel.

If use for car body, carefully rinse off with water afterwards.

Contents - 180 ml + Microfiber towel

Features

Cleaner design for glass/ceramic coating contains only mild cleaning ingredients. Restoring brightness of coated vehicle body. Symptoms such as water spots, small scratches on door knobs can be easily removed!

Direction

1. Wash off dirt, dust or mud, and wipe off water.

2. Shake bottle well.

3. Pour a coin size amount of  liquid onto included towel.

4. Rub towel onto surface one panel at a time on affected areas.

Contents - 1pc

Features

Direction

1. Operate the wiper approx 3 minutes on dry window surface, then starts creating water repellent layer.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.
* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Contents - 1pc

Features

Direction

1. Operate the wiper approx 3 minutes on dry window surface, then starts creating water repellent layer.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.
* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Contents - 1pc

Features

Direction

1. Operate the wiper approx 3 minutes on dry window surface, then starts creating water repellent layer.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.
* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Contents - 1pc

Features

Direction

1. Operate the wiper approx 3 minutes on dry window surface, then starts creating water repellent layer.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.
* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Contents - 1pc

Features

Direction

1. Operate the wiper approx 3 minutes on dry window surface, then starts creating water repellent layer.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.
* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.