pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.
Direction
1. Wash off sand, mud or dust prior to spraying.
2. Shake bottle well approx. 20 times, and turn trigger "ON".
3. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.
4. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.
* When spray over brake disc, it reacts and changes colour.
Rinse away immediately, if left on too long, may cause bad effects for brake disc.
5. Wipe off with clean towel.
Carry out brake test with low gear 2-3 times after cleaning.
* This product is formulated for wheel.
If use for car body, carefully rinse off with water afterwards.
Solid wax creates a hard coating durable up to 1 month. Enhances tire natural gloss black. Can be used to on tires, convertible leather top, fix scuff marks on exterior bumper and trims.
Direction
1. Remove dirt from tires, convertible leather top or bumper in advance.
2. Take cap off and take out included applicator sponge.
3. Put wax on desired area and apply it thinly.
4. Allow to dry for approximately (5-10 minutes), polish with a soft cloth to get ultimate, beautiful matte finish.
Quick and easy glossy tire shine!Applicator can adjust for tire shape and easy to apply. Can apply up to 3-4 vehicles. High gloss finish with durability up to 6 weeks!
Direction
1. Wash off sand or dust in advance and ensure tire is dry.
2. Shake bottle well.
3. Remove cap and squeeze bottle allowing liquid to soak sponge.
4. Attach sponge side to tire sidewall and spread evenly around tire.
5. Allow to dry for approximately 5-10 minutes. No need to wipe off.
Contents - Cleaner (120mL) x 1bottle, Brush x 1pc, Cup x 1pc, Gloves x 2pcs
Features
This is acid type wheel cleaner, can dissolve burned iron powder and brake dust which cannot remove by conventional wheel cleaner with easy procedure. Strong acid cleaner dissolves heavy iron powder, which stuck against wheel, without damaged paint surface.
Direction
1. Remove dirt or oil by car shampoo and wipe off thoroughly.
2. Be sure that wheel is cool and confirm the area where iron powder is accumulated.
3. Take moderate amount of solution into attached cup, and start applying accumulated area with brush.
4. Let sit 10 minutes, buff off with clean towel. In case of difficultly wiping off once, repeat procedure 3 and 4.
* Application is up to 3 times.
5. Afterwards remove residue by rubbing with water.
* If rinsing is not enough, wheel might discolour, blushing and cause stain.
Brown staining on wheels and tyres really ruins the whole look of a vehicle. This newly-developed spray reacts with contaminants, even when embedded in the rubber, dissolving them to make it easy to simply rinse away the dirt. The sophisticated formula is gentle to wheel and tyre, but extremely powerful against oily grime and tar. Specialised grip makes for easy use, with generous contents that can treat approx. 20 wheels and tires.
Direction
1. Rinse surface with water to remove any dust or dirt.
2. Set nozzle to the ON position, and spray over entire surface without opening the white flap. Use around 40 shots for an average wheel.
3. Wait around 30 seconds for reaction, before scrubbing with a brush.
4. Ensure to rinse thoroughly with water, and dry with a towel. Failure to remove all product may damage surfaces.
5. Rinse nozzle with water after use.
Note: Test brakes at low speed after use. We recommend DiGloss Kamitoré series for effective tyre-cleaning tools. After use, protect your tyres with DiGloss Black Devil Tire Wax!
This non-abrasive deep clean can dissolve unsightly residues on wheels. The foam is easy to apply, and does not drip off, allowing the chemical components to work on loosening and lifting the dirt. The included sponge makes it easy to agitate dirt out from tight spaces. Suitable for aluminium and steel wheels.
Direction
1. First use water to remove what dust and dirt can be rinsed away.
2. Shake well and spray over the entire wheel. If the trigger is locked, turn the nozzle to open.
3. Let sit for 2-3 minutes, and then agitate with the provided sponge to lift dirt from the wheel surface.
4. Rinse thoroughly with water to remove all cleaner and dirt.
Carbon black and blackshine carnauba combine to create beautiful, natural black sheen for tyres. With a sleek black look, this tyre wax protects tyres from fading or browning due to UV, dirt, etc. Excellent water-resistance ensures the effect lasts for at least 2 months, without the use of hydrocarbon solvents. The wax-based formula guarantees no sliminess or slinging. Includes two 'Pitasupo' tyre sponges, for easy application.
Direction
Note: Shake well before opening. Use included gloves. Do not use on wet tyres. When particularly dirty, was tyres first with water, and dry before use.
1. Remove cap, apply 3 lines of liquid across the sponge surface.
2. To prevent dripping, start from the bottom of the tyre, and apply evenly to the whole.
3. After application, dry for at least 10-20 minutes, depending on temperature.
Note: To avoid slinging onto the body etc., do not drive until fully dry. Depending on the condition of the tyre, some unevenness may occur. In that event, allow to dry, and apply more liquid to create an even appearance. DiGloss Pitasupo Tire Sponge is also available for purchase separately. To increase gloss, polish gently with a cloth after drying.
BLACK BLACK creates a thick-film coating on tires and maximizes shine along with super durability. The non-sticky, hard coating prevents dirt from adhering, which helps your car maintain ideal conditions by simply washing. The coating lasts for more than 60 days, and this rubbing type does not splatter over other parts.
Directions
* Be sure to wear protective gloves. * If the tire is very dirty, remove unwanted residue in advance. * Do not use this product on wet tires.
1. Shake bottle well and put liquid on black side of included sponge. Allow enough liquid to soak thoroughly into applicator sponge.
2. Apply to tire and spread evenly across the tire.
Apply repeatedly until desired level of gloss is achieved.
3. Allow coating to dry for approximately 5-10 minutes after applying.
* If liquid gets into unwanted parts, wipe it off immediately with a clean towel or SOFT99 Silicone Off (sold separately).
Prevents tires and plastic leather from deteriorating, also gives a glossy finish to the surface. Wax brings out the maximum natural shine in the texture of the material. Wiping not necessary when using on tire. When using on leather, wipe off with a cloth after spraying.
Direction
1. If you use tires, wash off mud or dirt in advance.
2. Hold about 15-25cm away from the tire sidewall and spray evenly.
If applying on leather spray and spread thinly with a dry cloth.
pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.
Direction
1. Wash off sand, mud or dust prior to spraying.
2. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.
3. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.
* When spray over brake disc, it reacts and changes colour.
Rinse away immediately, if left on too long, may cause bad effects for brake disc.
4. Wipe off with clean towel.
Carry out brake test with low gear 2-3 times after cleaning.
* This product is formulated for wheel.
If use for car body, carefully rinse off with water afterwards.
