pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.
Direction
1. Wash off sand, mud or dust prior to spraying.
2. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.
3. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.
* When spray over brake disc, it reacts and changes colour.
Rinse away immediately, if left on too long, may cause bad effects for brake disc.
4. Wipe off with clean towel.
Carry out brake test with low gear 2-3 times after cleaning.
* This product is formulated for wheel.
If use for car body, carefully rinse off with water afterwards.
With Stain Cleaner Strong Type, all you need to do is spray and wipe it off. The white powder won't remain on the surface and re-wiping is NOT necessary. It chemically breaks down and gets rid of stubborn dirt, which normal car shampoo couldn't do. Abrasive compounds are NOT included, so it won't damage your car paint. The fresh scent of grapefruit gets rid off bad odor during the process.
Direction
* Remove dirt from the car in advance.
1. Shake the bottle well.
2. Turn the nozzle to <ON>, and spray it on the surface.
Liquid penetrates effectively between the space of adhesive and bonded surface allowed easy removal of sticky adhesive residues.
Direction
* Cut the end of a nozzle into the desired size.
1. Shear off the edge of a sticker and spray into gap with a small amount of liquid. Then, using the included spatula rub the sticker until it goes off.
2. In case any glue residue still remains on the surface, it's best to spray it again and let it soak for a while. Then, using a soft cloth try to rub it off. If the glue residue remains on the surface repeat process until completely removed.
Suitable for polishing dark colour paint. Ultra-fine powder suspended in liquid form to remove deteriorated coatings, marks and light scratches from paint. The included sponge helps achieve a professional-level finish with only hand polishing.
Direction
Use on washed and dried paintwork.
1. Put a moderate amount of product on the black surface of the sponge.
2. Rub with appropriate force on scratched or dirty areas.
3. When finished, wipe off with a soft clean towel.
Suitable for polishing light colour paint. Ultra-fine powder suspended in liquid form to remove deteriorated coatings, marks and light scratches from paint. The included sponge helps achieve a professional-level finish with only hand polishing.
Direction
1. If you use tires, wash off mud or dirt in advance.
2. Hold about 15-25cm away from the tire sidewall and spray evenly.
If applying on leather spray and spread thinly with a dry cloth.
Brown staining on wheels and tyres really ruins the whole look of a vehicle. This newly-developed spray reacts with contaminants, even when embedded in the rubber, dissolving them to make it easy to simply rinse away the dirt. The sophisticated formula is gentle to wheel and tyre, but extremely powerful against oily grime and tar. Specialised grip makes for easy use, with generous contents that can treat approx. 20 wheels and tires.
Direction
1. Rinse surface with water to remove any dust or dirt.
2. Set nozzle to the ON position, and spray over entire surface without opening the white flap. Use around 40 shots for an average wheel.
3. Wait around 30 seconds for reaction, before scrubbing with a brush.
4. Ensure to rinse thoroughly with water, and dry with a towel. Failure to remove all product may damage surfaces.
5. Rinse nozzle with water after use.
Note: Test brakes at low speed after use. We recommend DiGloss Kamitoré series for effective tyre-cleaning tools. After use, protect your tyres with DiGloss Black Devil Tire Wax!
Unique mist-mousse spray system accelerates the process of tire dressing, cutting down working time to a quarter that of conventional products. Unwanted residue just melts off and away from the tires, leaving them with a beautifully even shine. Two types of high viscosity silicones adhere to the tires, giving them a glossy, waterproof barrier.
Direction
1. Wash off any excess dirt beforehand if necessary.
2. Shake well and spray onto wet or dry tires.
3. Wait to dry before driving, or wipe away excess liquid with a cloth.
Dead bugs, bird droppings and tree sap can cause damage to car paint. Not with FUKUPIKA Bugs& Droppings Removal, simply just wiping, removes and completely cleans the car's surface. Compared with conventional cleaning wipes, this wipe makes it possible give the car a nice clean surface finish, without leaving behind any white residue. The products does not contain any petroleum solvent, making FUKUPIKA absolutely eco-friendly!
Direction
1. Take out one sheet from package.
2. Do not rub with excessive force. If removing heavy dirt, wipe and allow cleaner to penetrate dirt, then gently wipe area. Results may vary depending on the contamination and adhesion of dirt.
3. When removing mud, sand, and dust, wipe off surface lightly and finish with a cleaner side of wipe. * If white residue of cleaner remains on surface, wipe off with a clean wet towel.
4. If whole sheet gets dirty or dry, use another sheet. * Seal package firmly, in order to prevent sheets from drying out.
✔ QUICK EASY CLEAN & WAX CAR ✔ NO RINSING OR DRYING REQUIRED ✔ WATER REPELLENCY UP TO 1 MONTH ✔ CAN BE USE ON CERAMIC COATED VEHICLES
Triple-layer sheet for easy washing and waxing. Central layer designed for absorbing dirt to keep the outer layers clean. Helps prevent scratches and supports the structure of the outer layers to glide lightly and effortlessly over your vehicle. Leaves your car clean, shiny and with water repellency up to 1 months.
Direction
1. Open the front flap, and pull out one wipe.
2. Fold the sheet into quarters and lightly wipe down the body of the vehicle. Keep refolding the wipe to expose fresh surfaces and avoid spreading any dirt.
3. In particularly dirty areas, gently wipe off the dirt, then with a fresh surface of the sheet wipe of again.
4. If the entire wipe is dirty or becomes dried out, please use a fresh sheet.
5. Discard wipes after use.
NOTE: CLOSE AFTER USE TO KEEP WIPES MOIST.
Prime Clear Shampoo -Cleansing Shampoo for Coated Cars
A combination of pH-neutral surfactant and mild cleansing powder removes stubborn dirt and water marks from ceramic-coated vehicles, without damaging the coating itself. This product is compatible with all colours.
Direction
1. Rinse off dust and sand with water.
2. Shake well and open the shampoo, apply generously to the included sponge, and wash the vehicle.
3. Rinse thoroughly and remove leftover water droplets with a towel or cloth.
A pH neutral shampoo best dedicated for maintaining cars with professional coatings, can be used as a standalone maintenance product. Shampoo causes water to glide off when the car is being rinsed, leaving less water drops behind meaning less drying time. The shampoo produces best results if used in conjunction with other products from the SMOOTH EGG series.
Direction
1. Rinse car with water, remove dust and heavy dirt in order to prevent scratching paint.
2. Pour shampoo into bucket or apply squirt directly onto a sponge, create lather, then wash whole vehicle.
3. Rinse vehicle with water and dry using microfiber towel.
Neutral Shampoo Creamy Type Quick Rinsing + Compound in
High performance pH neutral shampoo removes stubborn dirt in a flash. Will not attract dirt even if the soap dries up during wash. Powerful wash that regains paint clarity. Ultra-fine cleaner particles clean without damaging the paint. Removes minor water spots in one wash.
Direction
1. Remove sand and dust from car with water.
2. Shake bottle well with cap on.
3. Pour 1 or 2 coin size drops of shampoo directly onto a damp sponge, create lather by rubbing sponge.
4. Clean vehicle with sponge.
5. Rinse well with water until all bubbles are gone.
6. Wipe off all water drops remaining on surface with a clean or absorption towel. If water drops remain on surface, it may cause spots or stains.
Neutral Shampoo has a superb cleaning properties, which prevents dirt and dry suds sticking to the bodywork, even in summer periods you will only need to rinse it once! Shampoo has anion properties which allows it to create crazy amount of suds giving you an additional layer of safe contact with the bodywork. We strongly recommend using the shampoo with our ‘SMOOTH EGG Creamy Soft Sponge’ to fully unleash the potential of this product.
Direction
1. Wet ‘SMOOTH EGG Creamy Soft Sponge’ first.
2. Pour solution directly onto sponge, or put 5 caps of shampoo into a 20L detailing wash bucket.
3. Lather sponge, if washing with bucket, agitate to allow air to create foams.
4. Glide sponge over body surface in horizontal motion, do not travel backward, compress sponge to release more water and suds.
5. If there is dirt on sponge surface simply squeeze to create suds to lift off dirt.
6. Rinse car after completing process.
7. Wipe off all water drops remaining on surface with a clean or absorption towel. If water drops remain on surface, it may cause spots or stains.
Powerful, pH-neutral, and compound-free, this high-powered shampoo lathers into a thick, creamy foam that just melts the dirt away. Professional size and packaging. Despite its powerful foaming ability, this product has been designed with ease of rinsing in mind. May be used on coated vehicles, diluted 1:50. Compatible with water- and air-driven foamers.
