Exterior

Contents - 300ml

Features

It removes dirt such as carbon or sludge accumulating on the inside of the injector or combustion chamber, and restores the engine power.

Direction

1. Leave the car idling for approximately 5-6 minutes to warm the engine.

2. Stop the engine and loosen the rubber hose a bit to make enough space to insert the tube to let you spray toward the throttle chamber.

3. Turn on the engine and use a whole bottle while keeping idling at about 2000 times engine rotation.

4. Meanwhile leave it for approximately 5-6 minutes after the engine stops, and reset the rubber hose. Afterward turn on the engine and snap until white smoke is not produced.

* Be sure not to spray over the Air flow meter.

Contents - 8ml

Features

Creates transparent glassy "Nano crystal coating" and ultimate shine on old plastic parts, lasts more than 6 months. Can be used on heated parts such as car or motorcycle's engine cover and silencer. Compatible with unpainted resin parts on car, motorcycle, home electric appliances and even office chairs!

Direction

1. Clean surface ensuring there is no dirt or oil, completely dry prior to applying.

2. Take liquid on black side of included sponge and spread evenly.
* Do not reuse old sponge.

3. Allow to dry for 5 min, wipe off evenly with dry clean towel.
* Do not touch or wet car for 24 hours after applying.
Coating takes 3-4 days to harden completely.