Shop By Brands

Contents - 70ml

Features

Maintains a strong coating which resists friction from wipers, dust, car-wash or cleansers, and lasts 6 times longer than conventional coating agents. The water repellency lasts up about 1 year.

Direction

1. Remove dust and dirt from windscreen with water.

2. Use ‘Glaco Roll On Compound’ in advance for surface preparation.

3. Take cap off and apply on dry windscreen.

4. Press side of bottle to allow fluid out and rub firmly onto windscreen without splashing fluid.
* Do not apply on wet windscreen as it may cause uneven marks to surface.

5. After drying for 5-10 minutes, wipe off with a dry clean towel.

6. Allow drying for at least 12 hours for coating to bond firmly onto windscreen.

Contents - 40 ml

Features

Repellent prevents water from remaining on the surface by lining the mirror with super-fine, microscopic studs. Spray creates an even coating and shortens the process. Suitable for reverse surfaces such as mirrors and reverse cameras.

Direction

* Clean side mirror/ reverse camera with car shampoo or 'Glaco Compound Roll On'

1. Spray evenly onto surface from a distance of approximately 15cm.
Tip: We recommend using the packaging or putting a towel around the mirror while spraying, in order to prevent fluid getting on other parts.

2. Allow to dry completely (in the summer for 1 hour, in the winter for 2 hours)

*Do not touch surface when dry.

Contents - 110ml

Features

Using the newly developed S.A.R.F. (Strong Adhesion + Rapid Finish) technology, the latest generation of Glaco creates an ultra-smooth layer that pushes away rain more powerfully than ever before... and it lasts for 4 months!
The swivel-head and large, square application felt allow for much easier application and make sure the corners get a proper coat.
Also repels traffic film, snow, and frost!

Direction

*Note: Wash away dirt and dust, and dry completely before application. Unscrew the cap and remove.

1. Press onto the glass and gently squeeze to release the liquid, allowing it to soak into the felt head.

2. Apply to the glass in a criss-cross pattern, squeezing to release more liquid as necessary. Leave no gaps.

3. Dry for 5-10 minutes, and wipe up with a tightly-wrung out damp towel.

Incomplete removal may lead to wiper judder.

Contents - 120ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.

Direction

*Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.

Contents - 75ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.

Direction

*Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.

Contents - 300ml

Features

Direction

Note: Make sure not to apply it on a wet glass surface, otherwise it may cause streaks and scratches

1. Prepare glass surfaces by thoroughly washing them with a pH neutral shampoo, dry and decontaminate the surface using flexible detergents, detergents or other such products. Glaco products are the best results when glass is cleaned with Glass Compound Z glass or Glaco cleaning products.

2. Make sure the glass surface is dry before application. The product may be damaged on a wet surface.

3. Remove the cap and apply the product to the disc in cross movements.

4. Wait for a visible white residue to appear on the surface.

5. Polish off residue with a clean, dry microfibre cloth.