Shop By Brands

Contents - 1x Large Brush, 1x Small Brush

Features

Brushes designed for cleaning narrow and awkward parts of wheels, such as nut holes and around valves. Brush tip made from pig hair. Unlike artificial fibres, pig hair has excellent balance between liquid retention and spreading. Grip made from polypropylene.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 400ml

Features

Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a glossy and hydrophobic hybrid coating.

Direction

1. Shake the bottle well before use.

2. Turn nozzle to on and allow 1 spray for every 30cm square area on dry paintwork, wipe off with clean dry towel immediately.

When spraying directly to microfiber towel, spray twice than usual amount and work into paintwork

* If heavily soiled, wash off dirt and wipe off water otherwise it may cause unevenness or streak mark.

* Change the towel surface when it gets dirty.

Applications

Contents - 50ml, 1x Applicator Pad, 2x Application cloth, 1x Microfiber Towel, 1x Pasteur Pipette

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

MARINE BOAT (12 MONTHS AFTER APPLICATION)

OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)

 
Direction

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!

Applications

Contents - 100ml, 2x Applicator Pad, 2x Microfiber Towel

Features - 2 Years Durability Hydrophilic Coating

H-7 was originally formulated for vending machines in Japan in the early 2000s and later found its use to protect objects in harsh environments: vehicles, wheels, marine vessels, vending machines, trains, signage, aircrafts, and other outside equipment and its housing. The product creates a tough, silicon-based coating that forms a hard glass layer to protect objects against corrosion from rain, salt, mud, chemicals, UV radiation, and even light abrasion. Excellent self cleaning effect with its hydrophilic properties and is absolutely safe for the paint. Can be used on gloss and matte surfaces. Coating provides superior waterproof and anti-rust functions, which makes it a suitable choice of coating for items that are installed outdoor.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Hardness – Excellent resistance against micro scratches caused by wind dust and dirt

✔️ Adhesion – Adheres tightly to paint allowing coat to have a long lasting durability

✔️ Super Hydrophilic – Excellent water sheeting effect, prevents water stain adhesion

FIELD TEST RESULTS

Drainage Performance Test – Water on hood receding

Less Frequent Visit to Car Wash

3 Months  Outside Exposure Test comparison to generic body glass coating

 
VENDING MACHINE (6 MONTHS AFTER APPLICATION)

MARINE BOAT (12 MONTHS AFTER APPLICATION)

OUT DOOR CONDENSER UNIT (34 MONTHS AFTER APPLICATION)

 
Direction

1. Completely remove grease and dirt from areas to be treated. If a cleaning agent or water is used, allow to dry completely.

2. Use Silicone Off to wipe down any remaining residual this will allow a stronger bond between the surface and coating.

3. Apply liquid to the white surface of the included sponge. Apply evenly to the surface, leaving no untreated or poorly covered areas. Use each sponge for only one application (do not reuse a sponge that has hardened).

4. Allow to dry for approximately 5 minutes, and wipe down lightly with the included cloth.

5. After coating, leave to cure in a dry place for 12 hours.

CAUTION!!!

Contents - 4000ml

Features

pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.

Direction

1. Wash off sand, mud or dust prior to spraying.

2. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.

3. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.

* When spray over brake disc, it reacts and changes colour.

Rinse away immediately, if left on too long, may cause bad effects for brake disc.

4. Wipe off with clean towel.

Carry out brake test with low gear 2-3 times after cleaning.

* This product is formulated for wheel.

If use for car body, carefully rinse off with water afterwards.

Contents - 500ml

Features

SOFT99 Leather Cleaner & Conditioner not only safely and efficiently cleans leather without risk of drying or degradation, but also restores and protects leather's natural gloss and sheen, without feeling greasy or sticky.

Direction

To apply, simply spray onto the surface and wipe around with a microfiber cloth.

Allow to dry about 20 minutes after wiping

For perforated leather, apply indirectly by spraying onto the microfiber towel first.

Contents - 250ml + 1 Applicator

Features

Suitable for polishing dark colour paint. Ultra-fine powder suspended in liquid form to remove deteriorated coatings, marks and light scratches from paint. The included sponge helps achieve a professional-level finish with only hand polishing.

Direction

Use on washed and dried paintwork.

1. Put a moderate amount of product on the black surface of the sponge.

2. Rub with appropriate force on scratched or dirty areas.

3. When finished, wipe off with a soft clean towel.

Contents - 250ml + 1 Applicator

Features

Suitable for polishing light colour paint. Ultra-fine powder suspended in liquid form to remove deteriorated coatings, marks and light scratches from paint. The included sponge helps achieve a professional-level finish with only hand polishing.

Direction

1. If you use tires, wash off mud or dirt in advance.

2. Hold about 15-25cm away from the tire sidewall and spray evenly.

If applying on leather spray and spread thinly with a dry cloth.

Contents - 1pc

Features

Compact and easy-to-use, this plastic glosser can freshen up an interior in an instant, and stows away easily thanks to its convenient size. Just rub to restore gloss, hide scratches, and deepen darkness of interior plastic. No-spray construction eliminates splashes and drips - easy pinpoint application.

Direction

Clear surface to treated prior to application

1. Open the cap, and apply to surface with a light pressure.

In the event of unevenness, wipe with a soft, clean towel.

Close cap after use.

Contents - 230ml + 1 Wipe Cloth

Features

Our newly developed quick coat not only gives your vehicle water-repellent Hydropolymer layer, but prevents water stains with its unique Hydropeeling technology. When a vehicle coated with Smooth Egg Hydro Flash is wet with rain, the residue that would normally result in a stain is carried away along with a small amount of the polymer. This is seriously strong protection. By including a specially formulated levelling agent, we are able to keep our Hydropolymer evenly adhered to your vehicle… and that keeps your car shining beautifully, with a gloss that withstands the elements. This product is suitable for use on wet or dry coated and uncoated vehicles, and may be used on all exterior and interior parts except upholstery. One bottle treats a medium-sized vehicle eight times.

Direction

Note: Before applying Smooth Egg Hydro Flash, be sure to wash your vehicle.

Drying is optional.

1. Shake well, remove the trigger lock, and spray onto the body, 1 spray for every 30cm² on dry car body, if car body is wet 1 spray for every 15cm² area

2. Wipe off quickly with the included cloth.

Work on a small area at a time.