SOFT99

Contents - 1x Wheel Cleaning Sponge

Features

Designed to make cleaning easy for both wide areas and tight spaces, the high quality construction of this wheel-cleaning sponge makes it both flexible and sturdy. Unique cellular construction removes dirt efficiently and ultrafine cut-pile microfibers loosen dirt without clogging. Durable inner sponge and innovative glue-free fixings retain elasticity - a long-lasting tool that maintains performance.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

If washing with water only, thoroughly wet the wheel before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 500ml

Features

Gel type spray glass cleaner lets you clean the glass easily without any liquid or water droplets leaving residue. The cleaning components are held in the gel, giving time to penetrate dirt and increase the effectiveness of cleaning stubborn dirt, such as bird droppings. Also suitable for use on mirrors, unpainted plastic, and rubber parts.

Direction

1. Turn the spray nozzle to “ON”.

2. Without shaking, spray onto the glass surface from 15 – 20cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary.

*If some residue remains on the glass, wipe again with a clean towel.

Contents - 1pc (640x230mm)

Features

Highly absorbent cloth can be used in various ways. Spread out, it can dry large areas very quickly, and can also be folded for use e.g. with coatings. Twist pile substructure massively reduces drag for light work and the 4Pocket structure makes work less tiring.

Direction

By putting both hands in the pockets, the towel can fit to contours and dry large areas.

Be sure to avoid touching the ground.

Easy fits into the grill or under visors to make drying awkward spots easy.

Absorbs well from glass surfaces also.

By folding the cloth, absorption power can be increased.

Contents - 1x Duster

Features

Microfiber dusters have a luxurious feel, and are quick and effective at removing dust from interior surfaces. Their attractive appearance enhances interior atmosphere, and do not look out-of-place in luxury vehicles.

Direction

Contents - 300ml

Features

This is the evolution of Rain Drop 'Bazooka' - coating both body and glass at the same time. The newly developed Tornado Vortex Head (TV Head) increases speed and ease of application.
Just spray and wipe to activate the G-RAS shield effect, boasting a dramatic improvement over existing technology to provide 5 months of deep shine and hydrophobic protection on the body, and 3 months of rain repellence on glass.
When empty, simply remove the TV Head and replace the cartridge with the large volume refill.

Direction

1. Wash and rinse vehicle thoroughly before use.

2. While locked, shake the can 20 times before spraying evenly onto the wet surface, about 2 seconds per square meter. Wipe up immediately with a clean, dry microfiber cloth, refolding as necessary.

NOTE:

Apply to glass before the body.

If unevenness occurs, thoroughly wash and wring out a microfiber cloth and repeat wiping.
When using on a dry surface, wet and wring out cloth before use.

When applying to grill or wheels, spray onto cloth and wipe surface.

After application, avoid wetting for 1 hour in summer, or 24 hours in winter, to improve coating performance.

In hot conditions (above 35℃), cool can in water for a few minutes before use.

In cold conditions, warm can in tepid water before use.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 800ml

Features

Brown staining on wheels and tyres really ruins the whole look of a vehicle. This newly-developed spray reacts with contaminants, even when embedded in the rubber, dissolving them to make it easy to simply rinse away the dirt. The sophisticated formula is gentle to wheel and tyre, but extremely powerful against oily grime and tar. Specialised grip makes for easy use, with generous contents that can treat approx. 20 wheels and tires.

Direction

1. Rinse surface with water to remove any dust or dirt.

2. Set nozzle to the ON position, and spray over entire surface without opening the white flap. Use around 40 shots for an average wheel.

3. Wait around 30 seconds for reaction, before scrubbing with a brush.

4. Ensure to rinse thoroughly with water, and dry with a towel. Failure to remove all product may damage surfaces.

5. Rinse nozzle with water after use.

Note: Test brakes at low speed after use. We recommend DiGloss Kamitoré series for effective tyre-cleaning tools. After use, protect your tyres with DiGloss Black Devil Tire Wax!

Contents - 2pcs

Features

The ultrafine, yet stiff brush makes it easy to remove dirt from the detailed surface of tyre walls.
A double layer of 70,000 brush hairs, each half the width of a human hair, easily work into the fine surface of the rubber, releasing and removing dirt. The easy-hold grip and flat surface make it suitable and comfortable for use on a wide-range of tyres.
The included finger guard protects against scratches when cleaning the lower part of the tyre.

Direction

Before use, remove all dust and dirt with water.

Ensure brush is fully wet before use.

Brush gently to preserve the fibre structure. Too much pressure will eventually damage the cleaning surface.

May be used with water, or with car shampoo. We recommend DiGloss Kamitoré Wheel & Tire Cleaner.

After use, wash with pH-neutral detergent, squeeze out excess water, and dry before storage.

How to make the finger guard:

1. Push the U shaped flap through the square hole.

2. Fold both layers twice to create a Π shape.

3. push the flap into the slit on the back of the sponge.

Ensure fingers do not project too far from the guard.

Do not allow the guard to contact other painted or plastic surfaces.

This guard does not guarantee full protection from injury. Always take care when working.

Contents - 4pcs

Features

Direction

Apply wax etc. to sponge, and apply to tyre evenly. Keep wiping to spread the product around. After use, wash with pH-neutral detergent, rinse, squeeze out excess water, and dry before storage.

Contents - 80ml

Features

Remove fog-causing dirt and leave a durable anti-fog coating to prevent fogging. Easy to use, cleaning and coating are completed in one step. Compatible with UV and IR blocking coatings!

Direction

1. Turn the spray nozzle to (ON).

2. Without shaking, spray onto the glass surface from 15-20 cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary. Finally wipe up with a dry surface.

* If some residue remains on the glass, wipe again with a clean towel.

Contents - 200g

Features

Direction

Note: To make wax application easier, wet the applicator before starting.

1. Thoroughly clean the car. Conduct a decontamination if necessary.

2. Apply a minimal amount of wax on the pad. Use the edge of the can if you pick up too much.

3. Spread a thin and even layer of wax over the paintwork in a criss-cross motion, working panel by panel.

4. Wait about 5-8 minutes for the wax to bind to the paintwork. The higher the temperature, the shorter the time.

5. Polish the residue with a clean and dry microfibre cloth. Change sides of the microfibre if necessary.

Note: Prolong the life of the wax by using cleaning agents with neutral pH and utilizing dedicated quick detailer spray, Fusso Coat Speed & Barrier, after each wash.

Contents - 200g

Features

Direction

Note: To make wax application easier, wet the applicator before starting.

1. Thoroughly clean the car. Conduct a decontamination if necessary.

2. Apply a minimal amount of wax on the pad. Use the edge of the can if you pick up too much.

3. Spread a thin and even layer of wax over the paintwork in a criss-cross motion, working panel by panel.

4. Wait about 5-8 minutes for the wax to bind to the paintwork. The higher the temperature, the shorter the time.

5. Polish the residue with a clean and dry microfibre cloth. Change sides of the microfibre if necessary.

Note: Prolong the life of the wax by using cleaning agents with neutral pH and utilizing dedicated quick detailer spray, Fusso Coat Speed & Barrier, after each wash.

Contents - 75ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.

Direction

*Note: Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.

3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.

Contents - 300ml

Features

Direction

Note: Make sure not to apply it on a wet glass surface, otherwise it may cause streaks and scratches

1. Prepare glass surfaces by thoroughly washing them with a pH neutral shampoo, dry and decontaminate the surface using flexible detergents, detergents or other such products. Glaco products are the best results when glass is cleaned with Glass Compound Z glass or Glaco cleaning products.

2. Make sure the glass surface is dry before application. The product may be damaged on a wet surface.

3. Remove the cap and apply the product to the disc in cross movements.

4. Wait for a visible white residue to appear on the surface.

5. Polish off residue with a clean, dry microfibre cloth.

Contents - 300ml

Features

It removes dirt such as carbon or sludge accumulating on the inside of the injector or combustion chamber, and restores the engine power.

Direction

1. Leave the car idling for approximately 5-6 minutes to warm the engine.

2. Stop the engine and loosen the rubber hose a bit to make enough space to insert the tube to let you spray toward the throttle chamber.

3. Turn on the engine and use a whole bottle while keeping idling at about 2000 times engine rotation.

4. Meanwhile leave it for approximately 5-6 minutes after the engine stops, and reset the rubber hose. Afterward turn on the engine and snap until white smoke is not produced.

* Be sure not to spray over the Air flow meter.

Contents - 8ml

Features

Direction

1. Remove all dirt and oil from the area to be treated. If water is used, be sure to dry completely.

2. Wearing the included gloves, shake the bottle well and add some liquid to the white surface of the included sponge. Spread thinly and evenly across the surface of the plastic.

3. After about one minute of drying, spread around again with the unused white side of the sponge, to smooth out any unevenness.

Note: Do not touch or wet for 24 hours after application. Full hardening ℃curs within 4 days. Coating must be applied with the included sponge. Do not reuse sponges.

Contents - 750ml

Features

A combination of pH-neutral surfactant and mild cleansing powder removes stubborn dirt and water marks from ceramic-coated vehicles, without damaging the coating itself. This product is compatible with all colours.

Direction

1. Rinse off dust and sand with water.

2. Shake well and open the shampoo, apply generously to the included sponge, and wash the vehicle.

3. Rinse thoroughly and remove leftover water droplets with a towel or cloth.

Contents - 400ml

Features

Direction

* Wash the vehicle before application.

1. Spray onto the wet car body.

2. Wipe dry with an absorbent cloth that has been dampened and wrung out.

* If it becomes uneven, wet the body and treat again.

Contents - 1800ml

Features

Direction

* Wash the vehicle before application.

1. Spray onto the wet car body.

2. Wipe dry with an absorbent cloth that has been dampened and wrung out.

* If it becomes uneven, wet the body and treat again.

Contents - 4L

Features