Products

Contents - 160 ml

Features

Beautiful mix of floral fruity musk fragrances

Made in Poland

Description

The detailing trolley version extended by the middle shelf. Trolley designed for detailing professional and amateur studios. Focus on convenience and functionality. Very practical and made of the highest quality materials will significantly increase the comfort of your everyday work. The right height, innovative solutions and stability guarantee are just a few of its advantages.

Features:

- height of the trolley 80 cm (easy to slide, do not bend down)
- 3 shelves with dimensions of 40x50cm and walls with a height of 10.5 cm
- 4 places / cavities for polishing machines
- 5 holes for brushes
- 2 bottles for bottles with coatings (43mm diameter fits bottles up to 100 ml)
- 2 places for mounting bottles. The absence of an inner edge allows you to avoid unrolled pressure on the atomizer when you pull the bottle
- 4 swivel castors (50mm) made of high quality rubber material, guaranteeing stability even on uneven surfaces
- 3 horizontal panels for stabilizing machines and hanging microfibers and bottles. The front panel is higher allowing you to create or stick an individual logo
- The "1" and "2" numbers are used to classify microfibres in activities requiring initial and final actions
- seals securing the place of machine Hanning
- made of 1.5 mm galvanized sheet metal
- powder coated and internally protected

Dimensions:

L 50cm x W 40cm x H 80cm

Contents - 70 ml

Features

Quick and easy glossy tire shine! Applicator can adjust for tire shape and easy to apply. Can apply up to 3-4 vehicles. High gloss finish with durability up to 6 weeks!

Directions

1. Wash off sand or dust in advance and ensure tire is dry.

2. Shake bottle well.

3. Remove cap and squeeze bottle allowing liquid to soak sponge.

4. Attach sponge side to tire sidewall and spread evenly around tire.

5. Allow to dry for approximately 5-10 minutes.
No need to wipe off.

Contents - 1x Large Brush, 1x Small Brush

Features

Brushes designed for cleaning narrow and awkward parts of wheels, such as nut holes and around valves. Brush tip made from pig hair. Unlike artificial fibres, pig hair has excellent balance between liquid retention and spreading. Grip made from polypropylene.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 1x Wheel Cleaning Sponge

Features

Designed to make cleaning easy for both wide areas and tight spaces, the high quality construction of this wheel-cleaning sponge makes it both flexible and sturdy. Unique cellular construction removes dirt efficiently and ultrafine cut-pile microfibers loosen dirt without clogging. Durable inner sponge and innovative glue-free fixings retain elasticity - a long-lasting tool that maintains performance.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

If washing with water only, thoroughly wet the wheel before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Made in Poland

Description

High quality, ergonomic and neat handle for two brushes. Designed for the effective use of space at work. Made of 1.5 mm durable steel, the brush is up to 0.5 kg. The narrow arms of the handle match most of the the brush handles holes. The distance from the arm to the wall is 6.5 cm, so that even large brushes do not touch the wall. Finally coated with a powder finish, both inside and outside, to provide an additional protective layer against oxidation.

Dimensions:

L 11.5cm x W 7cm x H 2.5cm

Contents - 200g

Features

The Kiwami, which translates to Extreme Gloss, is a great product for those who desire perfect balance between glossy finish and protection. Extreme Gloss is very easy producing a strong beading effect. Making your car paint shiny and smooth as silk! Available in two tone variations to produce best results depending on your vehicle’s paint colour.

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.

3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

* Drying time may be longer in cold temperature.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.

Contents - 200g

Features

‘The Kiwami’ is a carefully crafted blend of the finest Carnauba wax, reinforced with our latest synthetic polymers. This blend is designed especially to bring a dazzling gloss and sparkle to the paintwork of your silver vehicle for up to 3 months. This is the ultimate wax for gloss. This is ‘The Kiwami’.

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.

3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

* Drying time may be longer in cold temperature.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.

Contents - 200g

Features

The Kiwami, which translates to Extreme Gloss, is a great product for those who desire perfect balance between glossy finish and protection. Extreme Gloss is very easy producing a strong beading effect. Making your car paint shiny and smooth as silk! Available in two tone variations to produce best results depending on your vehicle’s paint colour.

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.

3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

* Drying time may be longer in cold temperature.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.

Contents - 20ml

Features

Spot stain remover kit for fabric seat which is effective for removing stubborn stain. Three simple procedure "Wash"→"Rinse"→"Absorb" can remove stain using our exclusive liquid and HPVA sponge. Can remove up to 30 fifty cent coin size stain. * HPVA=Hexagonal Polyvinyl Alcohol

Directions

1. Soak sponge in water and squeeze allowing sponge to become moist.

2. Shake bottle well and apply 5 drops of liquid onto sponge.

3. Press and tap sponge on stained area.
Cleaning liquid will react with stain and loosen it from the fabric fibres.

4. Rinse sponge.

5. Remove stain from fabric seat by using hexagonal side of sponge to absorb. Rotate each side continuously.

6. Rinse sponge and use flat clean side to absorb remaining excess liquid.

Contents - 300ml

Features

If desired, bring paintwork up to perfection with clear gloss then finish with Finishing Compound

✔ Suitable for all types of automobile paint
✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives

Recommended Pad & Speed

Sponge/Euro 'finishing' foam buff pad @ 1300rpm

Contents - 10 Sheets

Features

Dead bugs, bird droppings and tree sap can cause damage to car paint. Not with FUKUPIKA Bugs& Droppings Removal, simply just wiping, removes and completely cleans the car's surface. Compared with conventional cleaning wipes, this wipe makes it possible give the car a nice clean surface finish,without leaving behind any white residue. The products does not contain any petroleum solvent, making FUKUPIKA absolutely eco-friendly!

Directions

1. Take out one sheet from package.

2. Do not rub with excessive force. If removing heavy dirt, wipe and allow cleaner to penetrate dirt, then gently wipe area. Results may vary depending on the contamination and adhesion of dirt.

3. When removing mud, sand, and dust, wipe off surface lightly and finish with a cleaner side of wipe.
* If white residue of cleaner remains on surface, wipe off with a clean wet towel.

4. If whole sheet gets dirty or dry, use another sheet.
* Seal package firmly, in order to prevent sheets from drying out.

Contents - 500ml

Features

Gel type spray glass cleaner lets you clean the glass easily without any liquid or water droplets leaving residue. The cleaning components are held in the gel, giving time to penetrate dirt and increase the effectiveness of cleaning stubborn dirt, such as bird droppings. Also suitable for use on mirrors, unpainted plastic, and rubber parts.

Directions

1. Turn the spray nozzle to “ON”.

2. Without shaking, spray onto the glass surface from 15 – 20cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary.

*If some residue remains on the glass, wipe again with a clean towel.

Contents - 400ml

Features

Just spray and wipe to freshen up your vehicle’s bodywork, removing light dust and dirt while applying a glossy and hydrophobic hybrid coating.

Directions

1. Shake the bottle well before use.

2. Turn nozzle to on and allow 1 spray for every 30cm square area on dry paintwork, wipe off with clean dry towel immediately.

When spraying directly to microfiber towel, spray twice than usual amount and work into paintwork

* If heavily soiled, wash off dirt and wipe off water otherwise it may cause unevenness or streak mark.

* Change the towel surface when it gets dirty.

Contents - 12 Sheets (350mm x 300mm)

Features

✔ QUICK EASY CLEAN & WAX CAR
✔ NO RINSING OR DRYING REQUIRED
✔ WATER REPELLENCY UP TO 1 MONTH
✔ CAN BE USE ON CERAMIC COATED VEHICLES

Triple-layer sheet for easy washing and waxing. Central layer designed for absorbing dirt to keep the outer layers clean. Helps prevent scratches and supports the structure of the  outer layers to glide lightly and effortlessly over your vehicle. Leaves your car clean, shiny and with water repellency up to 1 months.

Directions

1. Open the front flap, and pull out one wipe.

2. Fold the sheet into quarters and lightly wipe down the body of the vehicle.  Keep refolding the wipe to expose fresh surfaces and avoid spreading any dirt.

3. In particularly dirty areas, gently wipe off the dirt, then with a fresh surface of the sheet wipe of again.

4. If the entire wipe is dirty or becomes dried out, please use a fresh sheet.

5. Discard wipes after use.

NOTE: CLOSE AFTER USE TO KEEP WIPES MOIST.

Contents - 200g

Features

Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

✔️ Coats up to 40 vehicles!

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.

3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.

Contents - 200g

Features

Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.

✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water

✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc

✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily

✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface

✔️ Coats up to 40 vehicles!

Directions

* Make sure that your car colour is compatible with product.

1. Wash and decontaminate car surface.

2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.

3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.

* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.

*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.

Contents - 300ml

Features

Fusso Coat F7 is a liquid sealant based on Fusso fluorine polymers. Product creates a shiny, super hydrophobic coat on the car’s body. Included applicator gives an even and smooth application. F7 is a perfect alternative for those who live in a hurry but still want to have unparalleled paint protection. Product is durable for up to 7 months with regular maintenance.

Directions

1. Prepare vehicle by washing thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, cleaner or silicone off.

2. Apply a small amount of product onto included sponge.

3. Spread product thinly and evenly, panel by panel, with cross movements.

4. Wait for sealant to dry on surface, until white residue becomes visible.

5. Polish residue with a dry and clean microfiber cloth.
*For best results we recommend bu ffing off with SOFT99 ‘Wipe Cloth’

Contents - 250ml

Features

Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.

Directions

1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.

2. Apply product onto included microfiber cloth.

3. Polish liquid firmly onto surface, panel by panel and you’re done!

Contents - 250ml

Features

Another product from the renowned Fusso family! You can feel safe about your car paint for up to 9 months after applying this product, hard polymer formed creating a protective, shiny and water-repellent shield! Improved gloss components will enable you to achieve even deeper shine on your car’s body. Mirror Shine is one of the quickest paint protection to apply - you apply it straight onto the paint with the included microfiber cloth, the effects are immediate! Available in two tones variation to produce best results depending on your vehicles paint colour.

Directions

1. Prepare vehicle by washing it thoroughly with pH neutral shampoo, drying and decontaminating car paint using a clay bar, a cleaner or other products.

2. Apply product onto included microfiber cloth.

3. Polish liquid firmly onto surface, panel by panel and you’re done!

Contents - 8 ml

Features

Creates transparent glassy "Nano crystal coating" and ultimate shine on old plastic parts, lasts more than 6 months. Can be used on heated parts such as car or motorcycle's engine cover and silencer. Compatible with unpainted resin parts on car, motorcycle, home electric appliances and even office chairs!

Directions

1. Clean surface ensuring there is no dirt or oil, completely dry prior to applying.

2. Take liquid on black side of included sponge and spread evenly.
* Do not reuse old sponge.

3. Allow to dry for 5 min, wipe off evenly with dry clean towel.
* Do not touch or wet car for 24 hours after applying.
Coating takes 3-4 days to harden completely.

Contents - 70 ml

Features

Formulated to coat polycarbonate plastic and glass, such as headlight covers, side visors, tail lamp covers, helmet shields and goggles. Specially designed curved applicator and included microfiber cloth for ease of application. Repels water under air pressure when driving. If you are a motorcycle or race car enthusiast, this product sure is suited for your needs!

Directions

1. Prepare the surfaces by washing and decontaminating.

2. Take off the cap and apply directly with felt applicator.

3. Apply gently ensuring full coverage.

4. Immediately wipe off with included towel.

*No need to wait for drying. Wipe off immediately before liquid gets dry.

Contents - 110ml

Features

Using the newly developed S.A.R.F. (Strong Adhesion + Rapid Finish) technology, the latest generation of Glaco creates an ultra-smooth layer that pushes away rain more powerfully than ever before... and it lasts for 4 months!
The swivel-head and large, square application felt allow for much easier application and make sure the corners get a proper coat.
Also repels traffic film, snow, and frost!

Directions

*Note: Wash away dirt and dust, and dry completely before application.

           Unscrew the cap and remove.

1. Press onto the glass and gently squeeze to release the liquid, allowing it to soak into the felt head.

2. Apply to the glass in a criss-cross pattern, squeezing to release more liquid as necessary. Leave no gaps.

3. Dry for 5-10 minutes, and wipe up with a tightly-wrung out damp towel.

Incomplete removal may lead to wiper judder.

Contents - 100ml

Features

Combining the abrasive powder of small, hard particles and big, soft particles, Glaco Glass Compound Roll-On is able to remove the toughest stains made from oily dirt and fluorine film. By just applying the product lightly onto the glass you will see immediate results as the roll-on removes the oil-film with ease. This convenient product can be used as surface preparation just before applying any coating to the glass.

Directions

1. Remove dust and dirt from glass with water, wipe off any water drops remaining on surface.

2. Shake bottle well with cap on and remove plastic seal.

3. Squeeze handle part of bottle to release compound liquid.

4.Polish onto glass until surface stops repelling liquid.

5. Wait for compound to dry, then wash glass clean with water to make a slurry and wipe off.

6. Remove polishing pad from applicator, then wash and dry for future use.

Contents - 40 ml

Features

Repellent prevents water from remaining on the surface by lining the mirror with super-fine, microscopic studs. Spray creates an even coating and shortens the process. Suitable for reverse surfaces such as mirrors and reverse cameras.

Directions

* Clean side mirror/ reverse camera with car shampoo or 'Glaco Compound Roll On'

1. Spray evenly onto surface from a distance of approximately 15cm.
We recommend putting a towel around the mirror while spraying, in order to prevent fluid getting on other parts

2. Allow to dry completely (in the summer for 1 hour, in the winter for 2 hours)

*Do not touch surface when dry.

Contents - 75 ml

Features

Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Making use of a specially-developed highly-reactive silicone compound, this glass sealant bonds instantly to the surface, meaning there is no need to dry before wiping off.

Directions

Apply only to clean, dry glass.

1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.

2. Use the felt applicator to rub the liquid all around the glass. Work on a 50 x 50 cm area at a time.

3. Immediately wipe with a clean, dry towel to spread the liquid over the whole surface and wipe off. Move on to the next area.

*Note: avoid wetting for 10 minutes after application.