Special cleaning mousse formulated to remove dirt without damaging leather seat. Contains no scent, which does not leave any bad odour after cleaning. Blended with Vitamin E to moisturise and prevent leather seat from deteriorating.
Directions
1. Shake can well.
2. Spray mousse on a soft cloth and rub in into leather.
Restore headlights, blinkers and taillights. Light one is a multi-step restoration kit that gives your headlight lenses a deep clean and removes haze and discoloration.
Directions
1. Remove dust and dirt prior to cleaning and application.
2. Shake "Base Cleaner" bottle well, pour liquid onto included cloth and polish lense.
3. Wipe off with clean side of cloth.
4. Shake "Hard Top Coat" bottle well, pour liquid onto included sponge and spread evenly allowing to dry for 1 minute.
* The coating film takes 3-4 days to harden completely. Do not touch or wet the car for 24 hours after applying.
Water based liquid wax formulated to bring out the "Gloss", "Shine" and "Smoothness" to surface. Added mango scent to reduce chemical odor. Can be used as maintenance liquid for wax coated vehicles.
Directions
1. Wash the car to remove dust, dirt and water component.
2. Shake bottle well, turn nozzle.
3. Spray approximately 50cm2 area on dry paintwork.
4. Wipe off immediately dry clean microfiber towel. * Recommend to use microfiber towel to prevent unevenness.
SOFT99 Leather Cleaner & Conditioner not only safely and efficiently cleans leather without risk of drying or degradation, but also restores and protects leather's natural gloss and sheen, without feeling greasy or sticky.
Direction
To apply, simply spray onto the surface and wipe around with a microfiber cloth.
Allow to dry about 20 minutes after wiping
For perforated leather, apply indirectly by spraying onto the microfiber towel first.
Highly absorbent cloth can be used in various ways. Spread out, it can dry large areas very quickly, and can also be folded for use e.g. with coatings. Twist pile substructure massively reduces drag for light work and the 4Pocket structure makes work less tiring.
Direction
By putting both hands in the pockets, the towel can fit to contours and dry large areas.
Be sure to avoid touching the ground.
Easy fits into the grill or under visors to make drying awkward spots easy.
Absorbs well from glass surfaces also.
By folding the cloth, absorption power can be increased.
Suitable for polishing dark colour paint. Ultra-fine powder suspended in liquid form to remove deteriorated coatings, marks and light scratches from paint. The included sponge helps achieve a professional-level finish with only hand polishing.
Direction
Use on washed and dried paintwork.
1. Put a moderate amount of product on the black surface of the sponge.
2. Rub with appropriate force on scratched or dirty areas.
3. When finished, wipe off with a soft clean towel.
Suitable for polishing light colour paint. Ultra-fine powder suspended in liquid form to remove deteriorated coatings, marks and light scratches from paint. The included sponge helps achieve a professional-level finish with only hand polishing.
Direction
1. If you use tires, wash off mud or dirt in advance.
2. Hold about 15-25cm away from the tire sidewall and spray evenly.
If applying on leather spray and spread thinly with a dry cloth.
By just applying the wax with included microfiber cloth, Mirror Shine WAX will create a mirror-like clear gloss and shine. This solid wax creates a thick-film coating without the need to wipe or dry, and it lasts for up to 3 months. May be used on plastic parts as well, such as headlight covers, car visor and tail lamps.
Directions
*Make sure car colour is compatible with this product. * Wash and decontaminate car surface.
1. Take wax using included cloth and apply evenly to car surface.
2. All you need to do is polish firmly on the surface, there is no need to wipe off. *Make sure to finish the entire process. If left unfinished, it may cause spots or unevenness. *For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
By just applying the wax with included microfiber cloth, Mirror Shine WAX will create a mirror-like clear gloss and shine. This solid wax creates a thick-film coating without the need to wipe or dry, and it lasts for up to 3 months. May be used on plastic parts as well, such as headlight covers, car visor and tail lamps.
Directions
*Make sure car colour is compatible with this product. * Wash and decontaminate car surface.
1. Take wax using included cloth and apply evenly to car surface.
2. All you need to do is polish firmly on the surface, there is no need to wipe off.
*Make sure to finish the entire process. If left unfinished, it may cause spots or unevenness. *For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Designed to hang one Nano polishing machines with cable holder. Can also fit most size DA and rotary types machines available on market.
Features:
- Designed for Nano Machines and will fit most size DA's & Rotary type machine. - Can be mounted onto our Detailing Trolley - Galvanized - Powder coated
Dimensions:
L 11cm x W 7cm x H 19cm
*The detailing trolley is not part of the hanger's offer
Neutral Shampoo has a superb cleaning properties, which prevents dirt and dry suds sticking to the bodywork, even in summer periods you will only need to rinse it once! Shampoo has anion properties which allows it to create crazy amount of suds giving you an additional layer of safe contact with the bodywork. We strongly recommend using the shampoo with our ‘SMOOTH EGG Creamy Soft Sponge’ to fully unleash the potential of this product.
Directions
1. Wet ‘SMOOTH EGG Creamy Soft Sponge’ first.
2. Pour solution directly onto sponge, or put 5 caps of shampoo into a 20L detailing wash bucket.
3. Lather sponge, if washing with bucket, agitate to allow air to create foams.
4. Glide sponge over body surface in horizontal motion, do not travel backward, compress sponge to release more water and suds.
5. If there is dirt on sponge surface simply squeeze to create suds to lift off dirt.
6. Rinse car after completing process.
7. Wipe off all water drops remaining on surface with a clean or absorption towel. If water drops remain on surface, it may cause spots or stains.
Neutral Shampoo Creamy Type Quick Rinsing + Compound in
High performance pH neutral shampoo removes stubborn dirt in a flash. Will not attract dirt even if the soap dries up during wash. Powerful wash that regains paint clarity. Ultra-fine cleaner particles clean without damaging the paint. Removes minor water spots in one wash.
Directions
1. Remove sand and dust from car with water.
2. Shake bottle well with cap on.
3. Pour 1 or 2 coin size drops of shampoo directly onto a damp sponge, create lather by rubbing sponge.
4. Clean vehicle with sponge.
5. Rinse well with water until all bubbles are gone.
6. Wipe off all water drops remaining on surface with a clean or absorption towel. If water drops remain on surface, it may cause spots or stains.
Not only cleans fabric seat but also gets rid of bad odours. Antibacterial effect prevents moulds or ticks from occurring, leaving a fresh mint scent behind. Can easily remove dirt, tar, stains or sebum from fabric seats. Included brush used for agitation to remove dirt in fabric. Organic solvent is NOT included, so it is very friendly to people and fabrics.
Directions
1. Turn nozzle to <MIST>.
2. Spray from a distance of approximately 15-20cm from fabric seats or mats.
3. Use included brush to agitate, area sprayed will bubble.
4. Wipe off the bubble and dirt with a clean towel before surface gets dry.
Just spray on and wipe off to remove dead bugs, tar, and other oily dirt. It really is that so simple! It also creates a temporary anti-fouling coating to prevent adhesion of dirt.
Directions
* Use on a washed and dried vehicle.
1. Spray on the dirty area from a distance of 20-30 cm.
Fabric seat deodoriser directly attacks and neutralises smells trapped in fabric seats, effectively removing smells when conventional products would fail. Newly developed direct injection mechanism allows the deodorising and anti-bacterial compounds to penetrate directly into the inner structure of the cushioning to attack those stubborn smells coming from sweat, pets, tobacco and etc.
Directions
*Wipe down seat completely with a wrung-out damp towel.
1. Shake well and unlock nozzle.
2. Press direct injection nozzle directly into fabric seat, spacing injections by around 30cm. Use 1-2 sprays for headrest, 4-6 for front seat or backrest. Each injection should be around 1 second.
3. Using spray lever, spray entire seat surface from a distance of approximately 20 cm.
4. After spraying, wipe down seat with dry towel, leave to dry completely (Allow at least 4 hours in summer and 12 hours in winter).
We present a high quality wall holder for the phone and headphones. Designed with convenience of use and a modern outlook. The problem with the location of the phone and headphones has been solved! The holder can be mounted anywhere, for example near the socket. Thanks to specially designed walls, the phone is completely safe even during strong vibrations. The interior surface of 8.6 cm x 26 cm will accommodate the majority of phones available on the market.
Features:
- Made of 1.5mm sheet metal - Galvanized - Powder coated
Contents - Abrasive 80ml, Ultrafine pad L ×1, Ultrafine pad S ×1, Compound Sponge ×1
Features
The high-gloss black plastic known as piano black shows scratches very easily, and can show age much more quickly than paint or other areas of the vehicle. This kit makes it easy to restore painted and unpainted piano black and other high-gloss plastics by hand, refining them to a near new condition.
Direction
Note: Be sure to thoroughly clean and thoroughly dry the area to be treated, and mask off neighbouring areas. Use a scratch removal compound (sold separately) with the compound sponge to remove any deep scratches beforehand.
1. With the cap closed, shake the bottle well.
2. Choose an ultrafine pad size appropriate or comfortable. Apply a moderate amount of compound to the black surface of the pad. Polish the surface while spreading the liquid in horizontal and vertical motions. Aim work on one 30×30 cm area at a time.
3. After polishing, remove any masking and wipe up any residue with a soft, clean towel.
Contents - 40ml Base Cleaner, 8ml Coating Liquid, 4 x Special Sheets, 4 x Sponge
Features
Restoration for unpainted resin parts such as a bumper or around wipers. Included 'Liquid Binder' removes dirt marks from the surface of resin parts, and 'Hard Clear Coat', creating a Silicon-based thick hard film coating.
Directions
1. Remove dirt, oil and any other unwanted residues from surface.
Dry completely.
2. Apply a small amount of “Liquid Binder” onto included sheet, then spread thinly and evenly.
3. Wipe off with clean side of sheet.
4. Detach one sponge, apply “Hard Clear Coat” onto black side of included sponge and spread evenly.
