Remove marks from Cutting and bring to a gloss with Polishing Compound
✔ Suitable for all types of automobile paint ✔ Fine ceramic abrasive is highly refined to prevent scratches, marring, and blurring ✔ New anti-clogging, low dust formula improves working conditions ✔ Can be used as a two- or three-step process, as needed ✔ Contain no silicone, gloss-enhancers, or any other unnecessary additives
Recommended Pad & Speed
Sponge/Euro foam buff pad @ 1500rpm (if sandpaper marks remain, use wool)
High quality hanger for 1 up to 3 polishing machines with convenient cable storage. Made of solid steel suitable for DA and rotary type machines with support plates from 30 - 180 mm. Sided excision is made for small polishing machines or other small components.
Features:
- Made of 1.5mm sheet metal - Galvanized layer - Powder coate - Easily adapt to a variety of Dual Action, rotary and pneumatic machines - Keeps up to 3 polishing machines - Additional cable storage
Shelf will hold pads with a diameter of 83mm to 165mm. Mounting elements placed in the upper and lower part of the feeder guarantee stability during the use of the feeder. The feeder will hold about 14 polishing pads.
Features:
- Holds about 14 polishing pads with diameter of 83mm to 165mm - Made of 1.5mm sheet metal - Galvanized - Powder coated
Shelf will hold pads with a diameter of 83mm to 165mm. Mounting elements placed in the upper and lower part of the feeder guarantee stability during the use of the feeder. The feeder will hold about 28 polishing pads.
Features:
- Holds about 28 polishing pads with diameter of 83mm to 165mm - Made of 1.5mm sheet metal - Galvanized - Powder coated
Rain Drop coating is formulated to apply onto the entire surface of car body, glass, plastic and chrome. The bazooka trigger spray design allows super-fast product application. Coating protects paint up to 3 months and glass 2 months.
Directions
1. Before use, shake can up and down about 20 times.
2. Wash vehicle to remove any dirt and dust. No need to completely dry vehicle, can apply product on wet surface.
3. Spray onto wet body/ glass, 1 second will cover about 1m2 area.
4. After spraying, immediately spread and wipe foam around surface with a microfiber or cotton towel. Wring out towel regularly.
5. Leave to dry completely for about 5 minutes in hot conditions and 20-30 minutes in winter
! WARNING: DO NOT TURN THE TAB
IF TAB IS TURNED IT WILL RELEASE THE PROPELLANT MAKING PRODUCT REDUNDANT.
TAB IS DESIGNED FOR SAFE DISPOSAL OF SPRAY CAN.
ONLY TURN TAB IN THE UPWARD DIRECTION WHEN PRODUCT IS COMPLETELY USED OR EMPTIED.
THIS WILL ALLOW FOR THE RELEASE OF PROPELLANT FROM THE CAN TO BE SAFELY DISPOSED OF.
Cleaner design for glass/ceramic coating contains only mild cleaning ingredients. Restoring brightness of coated vehicle body. Symptoms such as water spots, small scratches on door knobs can be easily removed!
Directions
1. Wash off dirt, dust or mud, and wipe off water.
2. Shake bottle well.
3. Pour a coin size amount of liquid onto included towel.
4. Rub towel onto surface one panel at a time on affected areas.
Compact and easy-to-use, this plastic glosser can freshen up an interior in an instant, and stows away easily thanks to its convenient size. Just rub to restore gloss, hide scratches, and deepen darkness of interior plastic. No-spray construction eliminates splashes and drips - easy pinpoint application.
Direction
Clear surface to treated prior to application
1. Open the cap, and apply to surface with a light pressure.
In the event of unevenness, wipe with a soft, clean towel.
Microfiber dusters have a luxurious feel, and are quick and effective at removing dust from interior surfaces. Their attractive appearance enhances interior atmosphere, and do not look out-of-place in luxury vehicles.
Direction
Do not scrub. Lightly brush and sweep the dust away.
Contents - 1x Coating Agent bottle (15mL), 2x Hard Sponge, 2x Soft Sponge, 3x Silicone off Wipes Sheets, 2x Gloves
Features
Bring the life back to faded plastic and rubber trim! This treatment restores the deep darkness, natural gloss, and rich texture of black trim to revitalize your vehicle. The unique coating liquid penetrates into the surface and polymerizes to form a flexible yet glossy surface, making it suitable for restoring both hard plastic and soft rubber!
Direction
Note: Apply only to clean, dry, unpainted plastic and rubber.
1. First clean and degrease the area to be treated using the included ‘Silicone Off’ degreasing sheets.
Note: Some textured plastics may pick up fibers from the sheet. Remove these before proceeding. To prevent the sheets from drying out, firmly seal the package between uses.
2. Cut sponge to suitable size for area to be treated. The black sponge is for hard plastic, the white sponge is for soft rubber. Apply a small amount of the liquid (green label), and spread thinly and evenly across the surface to be treated.
Note: Some rubber parts may absorb the liquid. Keep applying until enough liquid remains.
3. After drying for around 5 minutes, use a fresh sheet to lightly wipe up the surface for an even finish. If left for too long, the excess will not be possible to remove.
Note: Do not touch or wet for 24 hours. Do not reuse sponges that have hardened. If the liquid unintentionally comes into contact with another surface, wipe off immediately.
Neutral shampoo which doesn’t damage your car's coated surface. Formulated for maintaining professional or wax-coated vehicles. Included sponge will create bubbles and lather. Product contains NO synthetic cleaning components and abrasive compounds. Natural ingredient, eco-friendly and compatible with ALL colours.
Directions
1. Remove dust and dirt with water.
2. Dilute the liquid 1 cap/ 1L water and apply to included sponge.
3. Wash car gently with sufficient bubbles.
4. Rinse and wipe off remaining water drops with a clean towel.
Replaces IPA wipe down. Essential for surface preparation prior to applying wax or ceramic and glass coating, it will improve the adhesion of the coating to the vehicles surface. The aerosol design allows minimum product usage while spreading to a large area!
✔ Oil, Polish residue and fillers remover ✔ Prep item before applying wax / coating ✔ Replaces IPA wipe down ✔ Improves the adhesion of the surface protective coating ✔ Safe for paint
Directions
1. Shake bottle well
2. Spray on desired panel and wipe dry with a dry detailing microfiber cloth
3. Expose new clean areas of the towel to avoid smearing the collected wax, oil or compound back onto the vehicle.
Small polishing pads feeder with specially designed gutter at the bottom of the feeder allows for convenient removal of pads. Inner surface diameter of 8.5cm will accommodate pads with a diameter of 83mm. Mounting elements placed in the upper and lower part of the feeder guarantee stability during the use of the feeder.
Features:
- Fits 83mm pads - Made of 1.5mm sheet metal - Galvanized layer - Powder coated
