SMOOTH EGG Clay Bar gently removes iron powders and deposits from glass/ ceramic coatings.
Direction
1. Wash car, removing sand and dust from the body of vehicle.
2. Knead clay bar by hand until it's soft and flat.
3. Gently slide clay bar over wet surface. * Be sure to knead the bar regularly to expose fresh clay.
Note: Always let the clay bar do the work never add pressure on the surface. Always lubricate with water or shampoo water when using clay bar on surface.
Newly formulated triple-abrasive particles easily removes scaly spots which conventional compound cleaners cannot. Removes fluorine and sticky oil-film deposits. Restores car's glass close to original transparency. Special application pad is included.
Direction
1. Remove dust and dirt from glass with water, dry off any water remaining on surface.
2. Shake bottle well.
3. Pour liquid onto white side of included pad, begin to polish surface of glass.
Contents - 1x Coating Agent bottle (15mL), 2x Hard Sponge, 2x Soft Sponge, 3x Silicone off Wipes Sheets, 2x Gloves
Features
Bring the life back to faded plastic and rubber trim! This treatment restores the deep darkness, natural gloss, and rich texture of black trim to revitalize your vehicle. The unique coating liquid penetrates into the surface and polymerizes to form a flexible yet glossy surface, making it suitable for restoring both hard plastic and soft rubber!
Direction
Note: Apply only to clean, dry, unpainted plastic and rubber.
1. First clean and degrease the area to be treated using the included ‘Silicone Off’ degreasing sheets.
Note: Some textured plastics may pick up fibers from the sheet. Remove these before proceeding. To prevent the sheets from drying out, firmly seal the package between uses.
2. Cut sponge to suitable size for area to be treated. The black sponge is for hard plastic, the white sponge is for soft rubber. Apply a small amount of the liquid (green label), and spread thinly and evenly across the surface to be treated.
Note: Some rubber parts may absorb the liquid. Keep applying until enough liquid remains.
3. After drying for around 5 minutes, use a fresh sheet to lightly wipe up the surface for an even finish. If left for too long, the excess will not be possible to remove.
Note: Do not touch or wet for 24 hours. Do not reuse sponges that have hardened. If the liquid unintentionally comes into contact with another surface, wipe off immediately.
Apply this, and rain will bead up and roll down the glass, cleanly taking with it any other water along the way. Just by driving at 45 km/h or more, all the water will fly off the glass! Significantly reduces the stress and danger of driving in the rain, especially at night. Treating your glass is made easy with the built-in felt applicator.
Direction
*Note: Apply only to clean, dry glass.
1. Remove the cap, press the felt applicator onto the glass and gently squeeze the bottle to let out some liquid.
2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.
3. After drying for 5-10 minutes, wipe off the residue with a damp, wrung-out towel.
High quality trays for storing and sorting of detailing accessories. The depth of the shelf is 86 mm which allows to store even large dimensions of accessories such as polishing pastes. Robust steel and powder finish guarantee excellent appearance and durability of the material.
pH balanced Iron remover/cleaner designed to dissolve brake dust and iron contaminants upon contact.
Direction
1. Wash off sand, mud or dust prior to spraying.
2. Shake bottle well approx. 20 times, and turn trigger "ON".
3. Spray on surface liberally, initially colourless liquid will gradually turn purple/red within approx. 1-4 minutes.
4. Thoroughly rinse treated surface with a strong stream of water. If solution dry on fully, use a stronger jet of water from a pressure washer to remove film.
* When spray over brake disc, it reacts and changes colour.
Rinse away immediately, if left on too long, may cause bad effects for brake disc.
5. Wipe off with clean towel.
Carry out brake test with low gear 2-3 times after cleaning.
* This product is formulated for wheel.
If use for car body, carefully rinse off with water afterwards.
The Kiwami, which translates to Extreme Gloss, is a great product for those who desire perfect balance between glossy finish and protection. Extreme Gloss is very easy producing a strong beading effect. Making your car paint shiny and smooth as silk! Available in two tone variations to produce best results depending on your vehicle’s paint colour.
Directions
* Make sure that your car colour is compatible with product.
1. Wash and decontaminate car surface.
2. Take a moderate amount of wax and spread evenly onto car's body using included sponge.
3. After surface gets dry (5-10 minutes in 20℃), wipe off with a soft clean towel.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
* Drying time may be longer in cold temperature.
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Restore headlights, blinkers and taillights. Light one is a multi-step restoration kit that gives your headlight lenses a deep clean and removes haze and discoloration.
Direction
1. Remove dust and dirt prior to cleaning and application.
2. Shake "Base Cleaner" bottle well, pour liquid onto included cloth and polish lense.
3. Wipe off with clean side of cloth.
4. Shake "Hard Top Coat" bottle well, pour liquid onto included sponge and spread evenly allowing to dry for 1 minute.
* The coating film takes 3-4 days to harden completely. Do not touch or wet the car for 24 hours after applying.
Formulated to coat polycarbonate plastic and glass, such as headlight covers, side visors, tail lamp covers, helmet shields and goggles. Specially designed curved applicator and included microfiber cloth for ease of application. Repels water under air pressure when driving. If you are a motorcycle or race car enthusiast, this product sure is suited for your needs!
Direction
1. Prepare the surfaces by washing and decontaminating.
2. Take off the cap and apply directly with felt applicator.
3. Apply gently ensuring full coverage.
4. Immediately wipe off with included towel.
*No need to wait for drying. Wipe off immediately before liquid gets dry.
By just applying the wax with included microfiber cloth, Mirror Shine WAX will create a mirror-like clear gloss and shine. This solid wax creates a thick-film coating without the need to wipe or dry, and it lasts for up to 3 months. May be used on plastic parts as well, such as headlight covers, car visor and tail lamps.
Direction
*Make sure car colour is compatible with this product. * Wash and decontaminate car surface.
1. Take wax using included cloth and apply evenly to car surface.
2. All you need to do is polish firmly on the surface, there is no need to wipe off.
*Make sure to finish the entire process. If left unfinished, it may cause spots or unevenness. *For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’.
Carbon black and blackshine carnauba combine to create beautiful, natural black sheen for tyres. With a sleek black look, this tyre wax protects tyres from fading or browning due to UV, dirt, etc. Excellent water-resistance ensures the effect lasts for at least 2 months, without the use of hydrocarbon solvents. The wax-based formula guarantees no sliminess or slinging. Includes two 'Pitasupo' tyre sponges, for easy application.
Direction
Note: Shake well before opening. Use included gloves. Do not use on wet tyres. When particularly dirty, was tyres first with water, and dry before use.
1. Remove cap, apply 3 lines of liquid across the sponge surface.
2. To prevent dripping, start from the bottom of the tyre, and apply evenly to the whole.
3. After application, dry for at least 10-20 minutes, depending on temperature.
Note: To avoid slinging onto the body etc., do not drive until fully dry. Depending on the condition of the tyre, some unevenness may occur. In that event, allow to dry, and apply more liquid to create an even appearance. DiGloss Pitasupo Tire Sponge is also available for purchase separately. To increase gloss, polish gently with a cloth after drying.
Solid wax creates a hard coating durable up to 1 month. Enhances tire natural gloss black. Can be used to on tires, convertible leather top, fix scuff marks on exterior bumper and trims.
Direction
1. Remove dirt from tires, convertible leather top or bumper in advance.
2. Take cap off and take out included applicator sponge.
3. Put wax on desired area and apply it thinly.
4. Allow to dry for approximately (5-10 minutes), polish with a soft cloth to get ultimate, beautiful matte finish.
Clay bar removes unwanted residue such as iron powder, pitch, tar, bird droppings or dead bugs which cause low gloss and dull on the car. It is more effective to use before polishing, waxing or coating.
Direction
1. Wash car to remove sand or dust.
2. Knead clay bar by hand until it's soft and flat.
3. Rub lightly on car surface and wet area being cleaned.
4. If surface of clay bar gets dirty, refold and continue to use clean surface as needed.
Note: Always let the clay bar do the work never add pressure on the surface. Always lubricate with water or shampoo water when using clay bar on surface.
Neutral shampoo which doesn’t damage your car's coated surface. Formulated for maintaining professional or wax-coated vehicles. Included sponge will create bubbles and lather. Product contains NO synthetic cleaning components and abrasive compounds. Natural ingredient, eco-friendly and compatible with ALL colours.
Direction
1. Remove dust and dirt with water.
2. Dilute the liquid 1 cap/ 1L water and apply to included sponge.
3. Wash car gently with sufficient bubbles.
4. Rinse and wipe off remaining water drops with a clean towel.
Quick and easy glossy tire shine!Applicator can adjust for tire shape and easy to apply. Can apply up to 3-4 vehicles. High gloss finish with durability up to 6 weeks!
Direction
1. Wash off sand or dust in advance and ensure tire is dry.
2. Shake bottle well.
3. Remove cap and squeeze bottle allowing liquid to soak sponge.
4. Attach sponge side to tire sidewall and spread evenly around tire.
5. Allow to dry for approximately 5-10 minutes. No need to wipe off.
Replaces IPA wipe down. Essential for surface preparation prior to applying wax or ceramic and glass coating, it will improve the adhesion of the coating to the vehicles surface. The aerosol design allows minimum product usage while spreading to a large area!
✔ Oil, Polish residue and fillers remover ✔ Prep item before applying wax / coating ✔ Replaces IPA wipe down ✔ Improves the adhesion of the surface protective coating ✔ Safe for paint
Direction
1. Shake bottle well
2. Spray on desired panel and wipe dry with a dry detailing microfiber cloth
3. Expose new clean areas of the towel to avoid smearing the collected wax, oil or compound back onto the vehicle.
