Shop By Brands

Contents - 40ml Base Cleaner, 8ml Coating Liquid, 4 x Special Sheets, 4 x Sponge

Features

Restoration for unpainted resin parts such as a bumper or around wipers. Included 'Liquid Binder' removes dirt marks from the surface of resin parts, and 'Hard Clear Coat', creating a Silicon-based thick hard film coating.

Direction

1. Remove dirt, oil and any other unwanted residues from surface.

Dry completely.

2. Apply a small amount of “Liquid Binder” onto included sheet, then spread thinly and evenly.

3. Wipe off with clean side of sheet.

4. Detach one sponge, apply “Hard Clear Coat” onto black side of included sponge and spread evenly.

5. Do not touch or wet surface for 24 hours.

Contents - 300ml

Features

Rain Drop coating is formulated to apply onto the entire surface of car body, glass, plastic and chrome. The bazooka trigger spray design allows super-fast product application. Coating protects paint up to 3 months and glass 2 months.

Direction

1. Before use, shake can up and down about 20 times.

2. Wash vehicle to remove any dirt and dust.
No need to completely dry vehicle, can apply product on wet surface.

3. Spray onto wet body/ glass, 1 second will cover about 1m² area.

4. After spraying, immediately spread and wipe foam around surface with a microfiber or cotton towel. Wring out towel regularly.

5. Leave to dry completely for about 5 minutes in hot conditions and 20-30 minutes in winter

!warning: do not turn the tab

if tab is turned it will release the propellant making product redundant.

tab is designed for safe disposal of spray can.

only turn tab in the upward direction when product is completely used or emptied.

this will allow for the release of propellant from the can to be safely disposed of.

Contents - 1x Wheel Cleaning Sponge

Features

Designed to make cleaning easy for both wide areas and tight spaces, the high quality construction of this wheel-cleaning sponge makes it both flexible and sturdy. Unique cellular construction removes dirt efficiently and ultrafine cut-pile microfibers loosen dirt without clogging. Durable inner sponge and innovative glue-free fixings retain elasticity - a long-lasting tool that maintains performance.

Direction

Before use, rinse dirt and soil from the wheel with water.

1. Soak head in water before use.

If washing with water only, thoroughly wet the wheel before use.

2. After use, rinse and dry thoroughly.

If dirt remains, wash with pH-neutral detergent.

Contents - 500ml

Features

Gel type spray glass cleaner lets you clean the glass easily without any liquid or water droplets leaving residue. The cleaning components are held in the gel, giving time to penetrate dirt and increase the effectiveness of cleaning stubborn dirt, such as bird droppings. Also suitable for use on mirrors, unpainted plastic, and rubber parts.

Direction

1. Turn the spray nozzle to “ON”.

2. Without shaking, spray onto the glass surface from 15 – 20cm away, then immediately wipe around the glass with a clean, dry towel.

3. Wipe up the dirt, changing to a fresh surface of the towel when necessary.

*If some residue remains on the glass, wipe again with a clean towel.

Contents - 1pc (640x230mm)

Features

Highly absorbent cloth can be used in various ways. Spread out, it can dry large areas very quickly, and can also be folded for use e.g. with coatings. Twist pile substructure massively reduces drag for light work and the 4Pocket structure makes work less tiring.

Direction

By putting both hands in the pockets, the towel can fit to contours and dry large areas.

Be sure to avoid touching the ground.

Easy fits into the grill or under visors to make drying awkward spots easy.

Absorbs well from glass surfaces also.

By folding the cloth, absorption power can be increased.

Contents - 1x Duster

Features

Microfiber dusters have a luxurious feel, and are quick and effective at removing dust from interior surfaces. Their attractive appearance enhances interior atmosphere, and do not look out-of-place in luxury vehicles.

Direction

Contents - 300ml

Features

This is the evolution of Rain Drop 'Bazooka' - coating both body and glass at the same time. The newly developed Tornado Vortex Head (TV Head) increases speed and ease of application.
Just spray and wipe to activate the G-RAS shield effect, boasting a dramatic improvement over existing technology to provide 5 months of deep shine and hydrophobic protection on the body, and 3 months of rain repellence on glass.
When empty, simply remove the TV Head and replace the cartridge with the large volume refill.

Direction

1. Wash and rinse vehicle thoroughly before use.

2. While locked, shake the can 20 times before spraying evenly onto the wet surface, about 2 seconds per square meter. Wipe up immediately with a clean, dry microfiber cloth, refolding as necessary.

NOTE:

Apply to glass before the body.

If unevenness occurs, thoroughly wash and wring out a microfiber cloth and repeat wiping.
When using on a dry surface, wet and wring out cloth before use.

When applying to grill or wheels, spray onto cloth and wipe surface.

After application, avoid wetting for 1 hour in summer, or 24 hours in winter, to improve coating performance.

In hot conditions (above 35℃), cool can in water for a few minutes before use.

In cold conditions, warm can in tepid water before use.

Contents - 1pc

Features

1. Stand the wiper arm up, tilt the blade slightly so that the wiper rubber faces upward, and slide the wiper blade off while pressing the stopper.

2. Open the cover, insert the clip into the U-hook until it clicks, then close the cover.

3. Operate the wipers about 10 times.

4. Make sure the wipers and spoiler do not touch the body.

5. Operate the wipers on a dry windshield for about 3 minutes.

* In case of the temperature below 10°C may appear the water repellent effect slowly. Then operate the wiper as long as appear the effect. Using the defroster is effective to risen the glass temperature.

* In case of rainy day or wet glass condition may appear the water repellent effect slowly. Then operate the wiper again excepting for rainy day.

* If use window high detergency wash fluid, water repellent effect may be weaken.

* Do not wipe off black powder which adheres on wiper surface. This works the wiper operation smoothly.

* Immediately replace wiper when decrease wiping or water repellent performance.

* Recommend to replace the wiper rubber every half year.

Glaco Wiper New Aero Design

This is a uniquely designed wiper blade that combines the features of an aerodynamic wiper with its low height and excellent design with those of a tournament-style wiper that fits all types of curved glass surfaces and provides stable wiping performance.

Forms a coating film that repels rain

With only about half the wiping time of conventional types (compared to ours), which require wiping for at least 5 minutes when the glass is dry, a coating film is formed on the glass surface that repels rain, providing comfortable rain splash and good visibility on rainy days.

Wedge-shaped cross section to prevent "lifting"!

The wedge-shaped form of the wiper provides downforce from the driving wind, and stable wiping performance is achieved by applying appropriate wiper pressure even at high speeds.

Contents - 340g

Features

Under-seat Gel Air Freshener

A mature squash scent with added citrus and woody notes

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 160ml 

Features

Designer Cologne: Liquid

A high-quality soap scent wrapped in fresh, translucent rose and deep musk

Direction

1. Twist the cap around and remove it.

2. Remove the middle plug and place the cap back on.

3. Place it in a suitable spot in your car, like a cup holder.

4. Enjoy the long-lasting fragrance as it diffuses throughout your vehicle.

5. Adjust the placement for the desired scent strength.

Contents - 160ml 

Features

Designer Cologne: Liquid

A clean floral soap scent wrapped in soft musk

Direction

1. Twist the cap around and remove it.

2. Remove the middle plug and place the cap back on.

3. Place it in a suitable spot in your car, like a cup holder.

4. Enjoy the long-lasting fragrance as it diffuses throughout your vehicle.

5. Adjust the placement for the desired scent strength.

Contents - 160ml 

Features

Designer Cologne: Liquid

A refreshing and calming herbal scent of lemongrass and eucalyptus

Direction

1. Twist the cap around and remove it.

2. Remove the middle plug and place the cap back on.

3. Place it in a suitable spot in your car, like a cup holder.

4. Enjoy the long-lasting fragrance as it diffuses throughout your vehicle.

5. Adjust the placement for the desired scent strength.

Contents - 36g 

Features

Solid / Cartridge Air Freshener

Comfortable citrus woody fragrance complemented by fresh citrus and ginger

Direction

1. Take off the cap and remove the inner seal.

2. Replace the cap.

3. Select a flat surface with no angle, wipe the surface with a clean, wet cloth, and dry the area completely before installing.

4. Place the product firmly on the surface with the double-sided tape provided.

Contents - 36g

Features

Solid / Cartridge Air Freshener

Relaxing herbal fragrance of lemongrass and eucalyptus

Direction

1. Take off the cap and remove the inner seal.

2. Replace the cap.

3. Select a flat surface with no angle, wipe the surface with a clean, wet cloth, and dry the area completely before installing.

4. Place the product firmly on the surface with the double-sided tape provided.

Contents - 36g 

Features

Solid / Cartridge Air Freshener

Clean scent of floral savon embraced by warmful musk

Direction

1. Take off the cap and remove the inner seal.

2. Replace the cap.

3. Select a flat surface with no angle, wipe the surface with a clean, wet cloth, and dry the area completely before installing.

4. Place the product firmly on the surface with the double-sided tape provided.

Contents - 36g 

Features

Solid / Cartridge Air Freshener

Marine squash scent with a hint of fresh lemon

Direction

1. Take off the cap and remove the inner seal.

2. Replace the cap.

3. Select a flat surface with no angle, wipe the surface with a clean, wet cloth, and dry the area completely before installing.

4. Place the product firmly on the surface with the double-sided tape provided.

Contents - 36g 

Features

Solid / Cartridge Air Freshener

A warm and luxurious fruity floral scent

Direction

1. Take off the cap and remove the inner seal.

2. Replace the cap.

3. Select a flat surface with no angle, wipe the surface with a clean, wet cloth, and dry the area completely before installing.

4. Place the product firmly on the surface with the double-sided tape provided.

Contents - 36g 

Features

Solid / Cartridge Air Freshener

Beautiful mix of floral fruity musk fragrances

Direction

1. Take off the cap and remove the inner seal.

2. Replace the cap.

3. Select a flat surface with no angle, wipe the surface with a clean, wet cloth, and dry the area completely before installing.

4. Place the product firmly on the surface with the double-sided tape provided.

Contents - 200g

Features

Under-seat Gel Air Freshener

Superior floral fruity fragrance filled with splendid floral scent and a hint of leather

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Quality White Musk fragrance with warm apple blossom that includes fresh apple and peach

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Exotic combination of tropical fruity and floral fragrances

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Refreshing citrus scent

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Luxurious floral fruity blend complemented by amber and vanilla

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Beatiful mix of floral fruity musk fragrances

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Soft mixture of floral, apple and musk fragrances

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Graceful combination of citrus fruity and floral scents

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Chic and formal perfume like scent

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided

Contents - 200g

Features

Under-seat Gel Air Freshener

Deep and sweet scent of squash

Direction

1. Remove the cover

2. Remove the inner-seal

3. Replace the cover 

4. Select a flat surface with no angle 

5. Place the product firmly on the surface with the double-sided tape provided